The International Energy Agency Technology Collaboration Program for Ocean Energy Systems (OES) initiated the OES Wave Energy Conversion Modeling Task, which focused on the verification and validation of numerical models for simulating wave energy converters (WECs). The long-term goal is to assess the accuracy of and establish confidence in the use of numerical models used in design as well as power performance assessment of WECs. To establish this confidence, the authors used different existing computational modeling tools to simulate given tasks to identify uncertainties related to simulation methodologies: (i) linear potential flow methods; (ii) weakly nonlinear Froude–Krylov methods; and (iii) fully nonlinear methods (fully nonlinear potential flow and Navier–Stokes models). This article summarizes the code-to-code task and code-to-experiment task that have been performed so far in this project, with a focus on investigating the impact of different levels of nonlinearities in the numerical models. Two different WECs were studied and simulated. The first was a heaving semi-submerged sphere, where free-decay tests and both regular and irregular wave cases were investigated in a code-to-code comparison. The second case was a heaving float corresponding to a physical model tested in a wave tank. We considered radiation, diffraction, and regular wave cases and compared quantities, such as the WEC motion, power output and hydrodynamic loading.
This report provides an assessment on the prospects for offshore energy hubs. Four use cases have been developed and evaluated by respondents in a survey instrument for their forecasted time horizon to implementation and their business potential as opportunities for the maritime and offshore
industries. The report is produced by the PERISCOPE Group at Aarhus University for the PERISCOPE network.
Offshore energy hubs connect large amounts of offshore wind to a hub from where the generation can be transmitted to onshore, potentially linking to multiple surrounding countries. The benefits of such hubs, and the related meshed offshore grid to connect them, have been investigated in the North Sea. The system-wide impacts of offshore energy hubs in the Baltic Sea are less studied; however, the region is seeing increased interest in offshore wind development. This paper uses detailed offshore wind generation simulations and energy system optimisation to investigate the cost-effectiveness of offshore energy hubs in the Baltic Sea in different scenarios towards 2050. The results show that the largest deployment of offshore energy hubs occurs when the energy system is highly electrified. The strongest development of the offshore energy hubs occurs in the southern part of the Baltic Sea.
Recent times have seen a great interest on environmental issues and efficient, sustainable systems. This interest has required the employment of advanced composites for a myriad of industrial machines and innovative equipments. Among these applications, Flywheel Energy Storage Systems – FESS – represent a group of machines that are being re-invented through this process. Modeling composite flywheels has proven to be a complex task, which current Finite Element models fail to fulfill in a number of design contexts. This demand to model complex composite geometries and systems induced the proposition of new methods, aiming to capture the various physical effects existing in the problem. In the present contribution, the authors consider that it is viable to model the dynamic behavior of a Flywheel Energy Storage System via an adapted Carrera Unified Formulation, both in terms of accuracy and computational cost, for practical applications. The present work presents and explores a Carrera Unified Formulation model with extended capabilities dedicated to rotordynamics applications. The differences from standard Finite Elements models are presented, evidencing advantages and drawbacks of the proposed methodology over more traditional approaches. A case study is then presented, modeled, and the results are compared with those stemming from established formulations.
Massive investments in offshore wind power generate significant challenges on how this electricity will be integrated into the incumbent energy systems. In this context, green hydrogen produced by offshore wind emerges as a promising solution to remove barriers towards a carbon-free economy in Europe and beyond. Motivated by the recent developments in Denmark with the decision to construct the world's first artificial Offshore Energy Hub, this paper investigates how the lowest cost for green hydrogen can be achieved. A model proposing an integrated design of the hydrogen and offshore electric power infrastructure, determining the levelised costs of both hydrogen and electricity, is proposed. The economic feasibility of hydrogen production from Offshore Wind Power Hubs is evaluated considering the combination of different electrolyser placements, technologies and modes of operations. The results show that costs down to 2.4 EUR per kg can be achieved for green hydrogen production offshore, competitive with the hydrogen costs currently produced by natural gas. Moreover, a reduction of up to 13 pct. of the cost of wind electricity is registered when an electrolyser is installed offshore shaving the peak loads.
This scientific study aims to compare the significance of onboard positioning of two different classes of wind propulsion systems for retrofit installations to maximize fuel and emissions savings. The study focuses on comparing the performance a low lift-to-drag ratio wind propulsion system, the Rotor Sail, and a high lift-to-drag ratio one, the DynaRig, installed at different places on a real 84000 DWT bulk carrier ship to identify the most efficient placement of these two distinct systems to achieve maximum fuel efficiency. The investigation involves a comprehensive analysis of available deck spaces, and performance prediction program modeling is employed to estimate potential fuel savings for a typical route followed by the vessel. The results show that placing the WPS far forward, close to the hydrodynamic centre of lateral resistance, results in overall higher savings. Both WPS classes see a penalty when placed far from the hydrodynamic centre of lateral resistance, reducing their overall savings potential. However, Rotor Sails are more adversely affected due to their enhanced side force generation per unit thrust. Consequently, the placement of Rotor Sails becomes crucial, especially under upwind conditions, while DynaRigs prove more versatile for installations in the aft. This research provides valuable insights into enhancing the ship's energy efficiency and reducing its environmental impact in the maritime industry.
This paper proposes a multi-time scale scheduling strategy for a practical port coupled hydrogen-electricity energy system (CHEES) to optimize the integration of renewable energy and manage the stochasticity of port power demand. An optimization framework based on day-ahead, intra-day and real-time scheduling is designed. The framework allows coordinating adjustable resources with different rates to reduce the impact of forecast errors and system disturbances, thus improving the flexibility and reliability of the system. The effectiveness of the proposed strategy is verified by a case study of the actual CHEES in the Ningbo Zhoushan Port, and the impact of equipment anomalies on the port power system operation is studied through simulation of different scenarios. The results show that compared with a scheduling scheme without energy management strategy, CHEES with multi-time scale scheduling can save 25.42% of costs and reduce 14.78% of CO 2 emissions. A sensitivity analysis is performed to highlight the impact of hydrogen price and soft open points (SOP) rated power on the system economy. This study not only provides a new perspective for the optimal scheduling of port energy systems, but also provides a practical framework for managing port energy systems to achieve green transformation and sustainable development.
Bornholm plays a central role in the future offshore power expansion in the
Baltic Sea and as a node between future interconnections between countries. The
necessity to store/convert surplus power puts Bornholm in position to be the first
natural energy hub. Bornholm can be not only the centre for electrical equipment
such as substations but also a centre for P-2-X production from offshore wind power.
The production of electrofuels through P-2-X technologies can penetrate the
transport sector in Bornholm, the hardest to decarbonise, starting with the highspeed ferries to Ystad and Køge, which use in Rønne Havn as their base. The
needs to comply with existing and imminent stricter regulations create the
necessity for an immediate transition, before a fleet renewal. Therefore, this study
investigates the conversion of the hydrogen, produced using offshore wind
electricity, into methanol, whose use as a fuel is mature and does not require
substantial changes to the fleet.
Implementation of alternative energy supply solutions requires the broad involvement of local communities. Hence, smart energy solutions are primarily investigated on a local scale, resulting in integrated community energy systems (ICESs). Within this framework, the distributed generation can be optimally utilised, matching it with the local load via storage and demand response techniques. In this study, the boat demand flexibility in the Ballen marina on Samsø—a medium-sized Danish island—is analysed for improving the local grid operation. For this purpose, suitable electricity tariffs for the marina and sailors are developed based on the conducted demand analysis. The optimal scheduling of boats and battery energy storage system (BESS) is proposed, utilising mixed-integer linear programming. The marina’s grid-flexible operation is studied for three representative weeks—peak tourist season, late summer, and late autumn period—with the combinations of high/low load and photovoltaic (PV) generation. Several benefits of boat demand response have been identified, including cost savings for both the marina and sailors, along with a substantial increase in load factor. Furthermore, the proposed algorithm increases battery utilisation during summer, improving the marina’s cost efficiency. The cooperation of boat flexibility and BESS leads to improved grid operation of the marina, with profits for both involved parties. In the future, the marina’s demand flexibility could become an essential element of the local energy system, considering the possible increase in renewable generation capacity—in the form of PV units, wind turbines or wave energy
Chalk reservoirs, due to their high porosity and very low permeability, represent one of the most interesting cases for engineering studies of carbonates. They exhibit complex fluid-rock interactions because of their reactive surfaces and dense porous medium. The reinjection of produced water is an attractive strategy for managing wastewater flow from oil wells. However, the complex composition of produced water, the reactive nature of carbonate rocks, and their low permeability create challenges related to permeability loss.
This study examines the stages of permeability change during core flooding experiments up to the point of complete clogging. A distinctive feature of this study is the presence of residual oil in the core samples, which simulates real reservoir conditions during produced water reinjection. The presence of residual oil is an additional factor influencing the change in core permeability, but there is no clear consensus in the research community on its impact on permeability during produced water injection.
All experiments were conducted in a core flooding system simulating well conditions in terms of pressure (170 bar) and temperature (70 ◦C). Produced water samples from the Dan field were used to replicate the chemical and thermodynamic processes occurring in a real well. The experiments identified three stages of permeability change: an initial increase in permeability (+12%), a period of pressure stabilization, and a subsequent decrease in permeability (− 8%) due to the formation of inorganic precipitates within the core channels.
The primary objective of the experiments is to investigate the relationship between permeability changes and the stages of reinjection, with a focus on the effects of residual oil. The study focuses on identifying the processes occurring up to the point of complete clogging, considering the impact of residual oil saturation in the chalk core samples. Image analysis using scanning electron microscopy, particle size measurement with a zeta-potential meter, and thermodynamic scale formation modeling with ScaleCERE software were employed to explain these processes.
Three stages of permeability change were identified during the injection of 200 pore volumes of produced water: increased permeability (+12%), pressure stabilization, and decreased permeability (− 8%). The positive influence of residual oil saturation on the filtration and storage properties of the reservoir was established, due to the mobilization of chalk core particles. Additionally, the theory of core channel clogging during the reinjection of formation water by the formation of inorganic precipitates within the channels was confirmed.
Understanding the causes of permeability reduction that occurred during the stage of permeability decrease enables the development of water purification methods specifically targeted at the causes of rock clogging. Predicting the process of injecting a mixture of produced and seawater will help in interpreting the data during disposal operations by injecting formation water into an injection well, and it will allow for the selection of effective measures to mitigate the impact on the reservoir.