This report provides an assessment on the prospects for the microgrids at large ports. A survey has been developed to this end and has been evaluated by respondents to crowdsource a forecasted time horizon to implementation and its potential as an opportunity for the maritime and offshore industries. The report is produced by the PERISCOPE Group at Aarhus University for the PERISCOPE network.
Improving the power density of solid oxide fuel cell stacks would significantly enhance this technology for transportation. Using a monolithic structure to downsize the stack dimension offers a key to elevate the power density of solid oxide fuel cell stacks. This innovative design is promising but manufacturing is a challenge. The monolith is co-sintered in one firing step, and the gas channels are formed by burning off sacrificial organic materials. Structure distortion or fracture was observed in post-mortem investigations. In this work a multiscale, multiphysics modelling approach is proposed to describe and resolve this challenge in the debinding process occurring in a monolithic stack, i.e. the burning of organics and transportation of gases through the gradually opening microstructure, as well as the pressure build-up in the microstructure due to gas development. Simulation results show that a prominent pressure peak is experienced in the stack when a plasticiser (polyethylene glycol) and a pore-former (polymethyl methacrylate) are decomposed simultaneously. To reduce the high pressures, we investigate two possible strategies: (i) changing the mixture of organic additives; (ii) modifying the debinding temperature profile. Three tapes with different pore-formers are prepared, and the generated pressures during debinding of the three stacks are compared. The corresponding stack shapes after debinding are recorded. Numerical investigations show a good agreement with the post-mortem observations. By changing the composition of organics the distortion or fracturing of the stack can be avoided. Furthermore, to facilitate stack manufacturing, the high pressures can also be reduced by adjusting the heating rates and dwell temperatures of debinding. By using the new temperature profile suggested by the simulation study, the duration of debinding can also be reduced.
Several large offshore wind power plants (WPP) are planned in the seas around Europe. VSC-HVDC is a suitable means of integrating such large and distant offshore WPP which need long submarine cable transmission to the onshore grid. Recent trend is to use large wind turbine generators with full scale converters to achieve an optimal operation over a wide speed range. The offshore grid then becomes very much different from the conventional power system grid, in the sense that it is connected to power electronic converters only. A model of the wind power plant with VSC-HVDC connection is developed in PSCAD for time-domain dynamic simulation. This paper presents the modeling and simulation of such a system. A single line to ground fault has been simulated and fault currents for the grounded and ungrounded offshore grid system are obtained through simulation and then compared.
Corrosive wear of cylinder liners in large two-stroke marine diesel engines that burn heavy fuel oil containing sulfur is coupled to the formation of gaseous sulfur trioxide (SO3) and subsequent combined condensation of sulfuric acid (H2SO4) and water (H2O) vapor. The present work seeks to address how fuel sulfur content, charge air humidity and liner temperature variations affects the deposition of water and sulfuric acid at low load operation. A phenomenological engine model is applied to simulate the formation of cylinder/bulk gas combustion products and dew points comply with H2O–H2SO4 vapor liquid equilibrium. By assuming homogenous cylinder gas mixtures condensation is modeled using a convective heat and mass transfer analogy combined with realistic liner temperature profiles. Condensation of water is significantly altered by the liner temperature and charge air humidity while sulfuric acid condensation (the order is a few mg per cylinder every cycle) is proportional to the fuel sulfur content. Condensation takes place primarily in the upper part of the cylinder liner where a reduction of the surface temperature or saturated charge air provides that the deposited acid can be highly diluted with water.
Taking concrete steps towards a carbon-free society, the Danish Parliament has recently approved the establishment of the world's first two offshore energy hubs on Bornholm and on an artificial island in the North Sea. Being the two first-of-their-kind projects, several aspects related to the inclusion of these “energy islands” in the current market setup are still under discussion. To this end, this paper presents a first large-scale impact analysis of offshore hubs on the whole European power system and electricity market. Our study shows that energy hubs in the North Sea contribute to increase social welfare in Europe. However, when considering the impact on each country, benefits are not shared equally. To help the development of such projects, we focus on the identification of the challenges arising from the hubs. From a market perspective, we show how exporting countries are affected by the lower electricity prices and we point at heterogeneous consequences induced by new transmission capacity installed in the North Sea. From a system point of view, we show how the large amount of wind energy stresses conventional generators, which are required to become more flexible, and national grids, which cannot always accommodate large imports from the hubs.
In 2017, Energinet and TenneT, the Danish and Dutch Transmission System Operators (TSOs), have announced the North Sea Wind Power Hub (NSWPH) project. The project aims at increasing by 36 GW the North Sea offshore wind capacity, with an artificial island collecting all the power produced by wind turbines and several HVDC links transmitting this power to the onshore grids. This project brings together new opportunities and new challenges, both from a technical and economic point of view. In this regard, this paper presents three analyses regarding the design and operation of such an offshore system. First, we perform a techno-economic assessment of different grid configurations for the collection of the power produced by wind farms and its transmission to the hub. In this analysis, two frequencies and two voltage levels for the operation of the offshore grid are investigated. Our findings show that the nominal-frequency high-voltage option is the more suitable, as lowfrequency does not bring any advantage and low-voltage would results in higher costs. The second analysis is related to the differences in operating the system with low- or zero-inertia; different dynamic studies are performed for each configuration to identify proper control actions and their stability properties. Comparing the outcomes of the simulations, we observed that voltage and frequency oscillations are better damped in the zero-inertia system; however, the risk of propagating offshore faults in the connected onshore grids is mitigated with the inclusion of the synchronous condensers. Lastly, a comparison of ElectroMagnetic Transient (EMT) and phasor-mode (also known as RMS) models is presented, in order to understand their appropriateness of simulating low- and zeroinertia systems. The results show that phasor approximation modelling can be used, as long as eigen-frequencies in power network are well damped.
Global marine shipping annually accounts for about one billion tonnes of CO2 equivalent greenhouse gas emissions. Nuclear power propulsion may be an option to de-carbonise some niches of the merchant ocean fleet. This paper considers the three experimental nuclear-powered merchant ships launched and operated in the world so far; the iconic Savannah (USA), Otto Hahn (West Germany) and Mutsu (Japan). They were independently developed and operated in the 1960s and 1970s for technology demonstration and learning. A fourth ship, Sevmorput (Soviet Union/Russia, 1988–to date), is a pioneer in respect of its logistics functions and propulsion system. This paper develops a theoretical framework for the sustainability assessment of nuclear propulsion in ocean merchant shipping and presents a method for exploring nuclear propulsion, relative to flag state, ports, shipping resources and ocean transport services. The experimental ships’ transport efficiency is discussed and related to contemporary oil-fired shipping of general cargo, and to recent literature presenting possible future applications of merchant nuclear propulsion in some market niches. Insights provided include: (1) the experiments demonstrate that merchant nuclear propulsion may be technically feasible; (2) port and canal access for merchant nuclear-powered ships may be difficult and restricted; (3) the up-front costs, refuelling and end-of-life decommissioning costs of nuclear-powered ships are vast and uncertain against conventionally-powered ships; (4) because nuclear fuel is comparatively low-cost, the conventional oil-fired ship cost implications of high-speed operations do not apply.
We present the results of a numerical model which has been developed for estimating the contribution to the methane slip from different sources in a four-stroke dual-fuel marine engine running on natural gas. The model is a thermodynamic three-zone zero-dimensional full engine cycle model and considers methane slip contributions from short-circuiting, crevices and wall quenching. The model is applied to analyze the methane slip from a four-stroke dual-fuel medium speed marine engine using natural gas as primary fuel. At low loads, wall quenching is found to be the dominant contribution to the methane slip. At full load, the wall quenching contribution is comparable to the level of the short-circuiting and crevice contributions which only vary relatively little with load. At 75% load, the contribution from short-circuiting is highest. In addition, we found that in-cylinder post-oxidation of unburned fuel remaining after the main combustion is negligible.
In this reported work, multi-dimensional computational fluid dynamics studies of diesel combustion and soot formation processes in a constant volume combustion chamber and a marine diesel engine are carried out. The key interest here is firstly to validate the coupling of a newly developed skeletal n-heptane mechanism and a revised multi-step soot model using laser extinction measurements of diesel soot obtained at different ambient pressure levels in an optical accessible, constant volume chamber experiment. It is revealed that ignition delay times and liftoff lengths generated using the new skeletal model are close to those produced by the larger and more comprehensive chemical mechanisms, apart from those at the low pressure condition. The current study also demonstrates that the variation of averaged soot volume fraction with respect to the change of combustion chamber pressure captured using the revised soot model agrees reasonably well with the measurements in terms of peak values. The numerical model is subsequently applied to investigate the flame development, soot/nitrogen monoxide formation and heat transfer in a two-stroke, low-speed uniflow-scavenged marine diesel engine operating at full load condition, where optical measurements are not available. Comparisons to the experimental data show that the simulated pressure rise starts 1.0 crank angle degree in advance and the calculated peak pressure is 1.7% lower. The associated flame liftoff length is negligible, yielding higher local equivalence ratio and soot volume fraction values as compared to those under similar test condition in the constant volume chamber. With the use of the revised model, the total heat transfer to the walls calculated when soot radiative heat loss is taken into account is approximately 30% higher compared to that when only convective heat loss is considered. The averaged nitrogen monoxide concentration is 7.7% lower when both convective and soot radiative heat losses are accounted for but the net soot mass production is less sensitive to soot radiation. A sensitivity study reveals that neither increasing nor decreasing the soot absorption coefficient by 30% from the baseline setup is influential to nitrogen monoxide formation, soot mass production and heat transfer. The findings here aid to gain insights and provide a better understanding of the combustion and soot processes in large, uniflow-scavenged marine engines. The numerical model developed in this work can also be applied to explore different phenomena in this combustion system.
A computational fluid dynamics study of the scavenging process in a large two-stroke marine engine is presented in this work. Scavenging which is one of the key processes in the two-stroke marine engines, has a direct effect on fuel economy and emissions. This process is responsible for fresh air delivery, removing the combustion products from the cylinder, cooling the combustion chamber surfaces and providing a swirling flow for better air-fuel mixing. Therefore, having a better understanding of this process and the associated flow pattern is crucial. This is not achievable solely by experimental tests for large engines during engine operation due to the difficulties of measuring the flow field inside the cylinder. In this study, the axial and tangential velocities are compared and validated with the experimental results obtained from Particle Image Velocimetry (PIV) tests [1]. The simulations are conducted using both Unsteady Reynolds Averaged Navier Stokes (URANS) and Large Eddy Simulation (LES) turbulence models. We observe in general, there is a good agreement between the numerical and experimental results. The flow inside the cylinder is studied in different locations related to the bottom of the scavenging ports during the period with open exhaust valve. Moreover, the replacement of combustion products with fresh scavenge air is analysed. The effective flow angle is calculated for the air flow through the scavenging ports. It is found that the effective flow angle is different from the geometrical angle of the ports (20°). Results illustrate better performance of LES, especially in the prediction of the tangential velocity which is crucial for the simulation of an accurate swirl and air-fuel mixing inside the marine engines. LES predicts a uniform profile for the tangential velocity at the top of cylinder which is consistent with the experimental results while URANS predicts a solid body rotation.