This article aims to present the most relevant practices of offshore oil contracting at an international level, in order to better understand the legal dynamics of the sector. The problem investigated deals with the terms of the legal relationship between the State and national and foreign public companies, as well as the relationship between States, with a view to the exploitation of shared offshore oil resources. This problem is current, taking into account both the fact that oil is a scarce resource, as well as the fact that its offshore exploration is particularly complex and risky. This article presents, in a non-exhaustive way, some examples of practices that illustrate contractual trends that have already crystallized. The approach to its content is made from an international law perspective, focused on the transnational challenges posed to States and operators. It is concluded that the sector is characterized by a huge variety of practices, which reveals an ability of operators to adapt to the characteristics of the concrete challenges of an offshore exploration project. It also shows the political and economic particularities of the States involved in the process.
In previous research, there have been more investigations on methanol blended with other fuels such as diesel, biodiesel, gasoline, etc., but fewer investigations on methanol with ignition additives as a mono-fuel. To better understand the methanol mono-fuel combustion characteristics and to further apply them, a combined experimental and simulation study of methanol in a Scania heavy-duty compression ignition (CI) engine was carried out in this work. The experiments consisted of four groups with variable injection timings, variable fraction of ignition additives, variable charge air temperatures, and variable overall excess air ratios/power sweeps. Heat release rate (HRR), cylinder pressure, ignition delay and indicated efficiency were analyzed for each case. The analysis showed that the combustion type was partially premixed combustion (PPC) in some cases and diesel-like combustion in the rest. By observing all cases, the shortest ignition delay was 14.1°, and the longest was 22.8°. The indicated efficiencies were in the range of 0.35 to 0.43. Simulations and validation analyses were performed for all cases by a multi-packets model. The physical and chemical ignition delays were predicted. The physical ignition delays were in the range of 4.25 to 8.10°, and the chemical ignition delays were in the range of 6.66 to 17.1°. The chemical ignition delay was always longer than the physical one. This indicates that chemical ignition delay has to be prioritized to improve the ignition performance of methanol fuel.
The share of renewables in the power system is increasing rapidly. Large offshore wind power plants (OWPPs) are developed at a high pace and conventional fossil fuel-based plants are decommissioned. If the OWPP gets islanded due to any contingency or in the event of a blackout, the whole OWPP will be shutdown. This paper proposes a STATCOM with a battery storage that is located at the point of common connection to an OWPP to enable OWPP energization from a fully discharged state to operate in islanded mode. The STATCOM functionality provides fast and dynamic reactive power management and the battery unit provides active power balancing capability to regulate the frequency in the island. The concept is demonstrated through time-domain simulations on an OWPP model in PSCAD. The results confirm the technical feasibility of the system.
In a premixed dual-fuel (DF) methane-diesel engine, the ignition of the lean premixed methane/air mixture starts with the assistance of a pilot diesel injection. Auto-ignition of pilot fuel is important as it triggers the subsequent combustion processes. A delay in the auto-ignition process may lead to misfiring, incomplete combustion, and thus higher greenhouse emissions due to methane slip. Hence, a better understanding of the auto-ignition process for the pilot fuel can help to improve the overall engine performance, combustion efficiency, and to lower exhaust emission levels. In the present study, large eddy simulation (LES) is used to investigate the auto-ignition process of micro-pilot diesel in premixed DF combustion in a constant volume combustion chamber (CVCC). The entire DF combustion processes including methane gas injection, methane/air mixing, pilot diesel injection, and ignition are simulated. The numerical model is validated against experimental data. The present numerical model is able to capture the ignition delay time (IDT) within a maximum relative difference of 7% to the measurements. A higher relative difference of 38% is obtained when methane gas injection and mixing are omitted in the simulation and the methane/air is assumed homogeneous. This demonstrates the importance of inhomogeneity pockets. To study the effects of temperature and methane inhomogeneities separately, different idealized inhomogeneities in temperature and methane distribution are considered inside the CVCC. The inhomogeneity in the temperature is observed to have a more profound influence on the IDT than the methane inhomogeneity. The inhomogeneity pockets of temperature advance the first-stage ignition and, subsequently, the second-stage ignition. A sensitivity analysis on the effect of inhomogeneity wavelength reveals that the larger wavelengths enhance the combustion due to the presence of pilot diesel jets in the desirable regions for a longer time duration.
Slugging flow in the offshore oil & gas production attracts a lot of attention due to its limitation of production rate, periodic overload on processing facilities, and even direct cause of emergency shutdown. This work aims at two correlated objectives: (i) Preventing slugging flow; and meanwhile, (ii) maximizing the production rate at the riser of an offshore production platform, by manipulating a topside choke valve through a learning switching model-free PID controller. The results show good steady-state performance, although a long settling time due to the unknown reference for no slugging flow.
Several replacement fuel to today’s fossil based ship propulsion fuels have been addressed in MarEfuel. Key ones are; pyrolysis oil (blend in fuel), methanol and ammonia. These were singled out among many possible fuels from a preliminary analysis that indicated that they could play a key role in fulfilling the emission targets set politically and by the sector in the most cost effective manner. In the following they shall be treated in turn in some detail. Costs of several “blue” fuels have also been assessed. The projected costs are used in other parts of the MarEfuel project (e.g. for assessing the total cost of ownership).
The cybersecurity landscape is evolving, driven by a reinforcing feedback loop of increasingly sophisticated attacks and defences. Threat actors, long benefitting from the asymmetrical “attacker’s advantage” of focused targeting, have now matured their organizational structures to facilitate tactical information sharing, technique specialization, the establishment of markets for buying and selling exploit and vulnerability information, and providing training on how to circumvent detection and defence systems.
Offshore wind energy production has seen a significant expansion in the past decade and has become one of the most important maritime activities. However, the implications of offshore wind farm expansion for maritime security have, so far, received sparse attention in the literature. In this article we conduct one of the first thorough analyses of the security of offshore wind farms and related installations, such as underwater electricity cables, energy islands, and hydrogen plants.
The transition of the North Sea Region’s maritime and offshore industries toward a sustainable“Blue Growth” future is driven by incentives to unlock new growth areas, develop and apply new technologies, and increase productivity. The development and utilization of microgrids provides an opportunity to accomplish these goals. The rapid development in infrastructure and the trend toward the electrification of the seas has provided a context for growth, and microgrids pose a moduleto couple to existing infrastructure; a retrofit to improve the utilization of renewable energy sources. This report presents the outcome and analysis of a survey taken by 22 respondents. Respondents expect microgrids at large ports to emerge in 10 years and respondents rated the business potential at 3,77/5. Political factors are mentioned by most responses (40%), followed by social (30%), economic (16%), and technological factors (14%).