Shore power is an important green technology used by ports to reduce carbon emissions. This paper investigates how to design subsidy strategy for promoting the installation and utilization of shore power. However, while installation subsidies may promote the installation of SPI in ports, resulting in a reduction in ship emissions, utilization subsidies may attract more ship visits, which may increase the total emissions of a port. Therefore, subsidies for shore power utilization and installation should be optimized to minimize the cost to government (comprising the environmental costs of ship emissions, the cost of utilization or installation subsidies, and carbon taxes) and maximize the profit for ports (including profit from original and new ships, utilization and installation subsidies, and carbon taxes). Using the Stackelberg game methodology, we discuss five cases to give a comprehensive analysis of the design of different subsidy policies, including no subsidy, SPI-utilization subsidy undertaken by port, SPI-utilization subsidy undertaken by port and government, carbon emission tax policy considering SPI-utilization subsidy, and SPI-utilization and SPI-installation subsidies undertaken by port and government. Managerial insights are generated according to the theoretical analysis and numerical experiments results, which can give references to the government and port operators.
Various sources of harmonic problems in large wind power plants (WPPs) and optimized harmonic mitigation methods are presented in this paper. The harmonic problems such as sources of harmonic emission and amplification as well as harmonic stability are identified. Also modern preventive and remedial harmonic mitigation methods in terms of passive and active filtering are described. It is shown that WPP components such as long HVAC cables and park transformers can introduce significant low-frequency resonances which can affect wind turbine control system operation and overall WPP stability as well as amplification of harmonic distortion. It is underlined that there is a potential in terms of active filtering in modern grid-side converters in e.g. wind turbines, STATCOMs or HVDC stations utilized in modern large WPPs. It is also emphasized that the grid-side converter controller should be characterized by sufficient harmonic/noise rejection and adjusted depending on WPPs to which it is connected.
For many years, there has been a growing focus on the energy efficient operation of vessels, and several performance systems are available on the market. However, most of these systems have been developed for long-distance sailing, and cannot be used directly on working vessels. The aim of the paper is to present a conceptual framework, which describes the overall decision structures in connection with energy efficient operations of working vessels. The framework consists of three models: the first model describes the operational modes and activity states of a vessel; the second model describes the conceptual dependency between the different actors in the operational context and the last model presents the conceptual solution model, which integrates the two other models. The models are developed based on nearly 50 interviews conducted with seafarers and office staff, procedure descriptions, and observations during fieldwork on board the ships. The proposed framework will form the basis for a future multi-layered decision support system.
Wind Propulsion Systems (WPS) for commercial ships are vital to achieving the IMO targets on energy efficiency and GHG emissions. Most WPS will operate in a hybrid mode alongside actual main propulsion units. This will affect the propeller and engine operating conditions and thus, their performance. The present paper discusses a preliminary assessment of commercial ship propellers and engine performance variation as a function of the wind power installed for two propeller plant types (Fixed Pitch Propeller, FPP, and Controllable Pitch Propeller, CPP) at constant speed operational mode. The contribution is based on empirical and analytical methods requiring minimal input data. It aims to provide general trends and contribute basic knowledge on this matter. A cost model is included for a cost-benefit assessment of both propeller types. This leads to advice on which systems to install as a function of WPS installation size.
The approach documented in this paper employs system identification (SI), or data-based modelling, techniques as an alternative to model determination from first principles for modelling a vented oscillating water column wave energy converter, using real wave tank data gathered at Danmarks Tekniske Universitet. In SI, the parameters of the model are obtained from the experimental input/output data by minimizing a cost function, related to model fidelity. The main advantage of SI is its simplicity, as well as its potential validity range, where the dynamic model is valid over the full range for which the identification data was recorded. Furthermore, SI models are somewhat flexible, since they can be solely based on data (black-box models), or else can incorporate some physics-based information (grey-box models). However, a suitable excitation signal is of primary importance for the parametric model to be representative over a wide range of operating conditions.
Chalk reservoirs, due to their high porosity and very low permeability, represent one of the most interesting cases for engineering studies of carbonates. They exhibit complex fluid-rock interactions because of their reactive surfaces and dense porous medium. The reinjection of produced water is an attractive strategy for managing wastewater flow from oil wells. However, the complex composition of produced water, the reactive nature of carbonate rocks, and their low permeability create challenges related to permeability loss.
This study examines the stages of permeability change during core flooding experiments up to the point of complete clogging. A distinctive feature of this study is the presence of residual oil in the core samples, which simulates real reservoir conditions during produced water reinjection. The presence of residual oil is an additional factor influencing the change in core permeability, but there is no clear consensus in the research community on its impact on permeability during produced water injection.
All experiments were conducted in a core flooding system simulating well conditions in terms of pressure (170 bar) and temperature (70 ◦C). Produced water samples from the Dan field were used to replicate the chemical and thermodynamic processes occurring in a real well. The experiments identified three stages of permeability change: an initial increase in permeability (+12%), a period of pressure stabilization, and a subsequent decrease in permeability (− 8%) due to the formation of inorganic precipitates within the core channels.
The primary objective of the experiments is to investigate the relationship between permeability changes and the stages of reinjection, with a focus on the effects of residual oil. The study focuses on identifying the processes occurring up to the point of complete clogging, considering the impact of residual oil saturation in the chalk core samples. Image analysis using scanning electron microscopy, particle size measurement with a zeta-potential meter, and thermodynamic scale formation modeling with ScaleCERE software were employed to explain these processes.
Three stages of permeability change were identified during the injection of 200 pore volumes of produced water: increased permeability (+12%), pressure stabilization, and decreased permeability (− 8%). The positive influence of residual oil saturation on the filtration and storage properties of the reservoir was established, due to the mobilization of chalk core particles. Additionally, the theory of core channel clogging during the reinjection of formation water by the formation of inorganic precipitates within the channels was confirmed.
Understanding the causes of permeability reduction that occurred during the stage of permeability decrease enables the development of water purification methods specifically targeted at the causes of rock clogging. Predicting the process of injecting a mixture of produced and seawater will help in interpreting the data during disposal operations by injecting formation water into an injection well, and it will allow for the selection of effective measures to mitigate the impact on the reservoir.
This scientific study aims to compare the significance of onboard positioning of two different classes of wind propulsion systems for retrofit installations to maximize fuel and emissions savings. The study focuses on comparing the performance a low lift-to-drag ratio wind propulsion system, the Rotor Sail, and a high lift-to-drag ratio one, the DynaRig, installed at different places on a real 84000 DWT bulk carrier ship to identify the most efficient placement of these two distinct systems to achieve maximum fuel efficiency. The investigation involves a comprehensive analysis of available deck spaces, and performance prediction program modeling is employed to estimate potential fuel savings for a typical route followed by the vessel. The results show that placing the WPS far forward, close to the hydrodynamic centre of lateral resistance, results in overall higher savings. Both WPS classes see a penalty when placed far from the hydrodynamic centre of lateral resistance, reducing their overall savings potential. However, Rotor Sails are more adversely affected due to their enhanced side force generation per unit thrust. Consequently, the placement of Rotor Sails becomes crucial, especially under upwind conditions, while DynaRigs prove more versatile for installations in the aft. This research provides valuable insights into enhancing the ship's energy efficiency and reducing its environmental impact in the maritime industry.
Wind propulsion systems (WPS) for commercial ships can be a key ingredient to achieving the IMO green targets. Most WPS installations will operate in conjunction with propellers and marine engines in a hybrid mode, which will affect their performance. The present paper presents the development of a generic, fast, and easy tool to predict the propeller and engine performance variation, along with the cost, as a function of the wind power installed in two operation conditions: fixed ship speed and constant shaft speed. Specific focus is directed toward showing generic trends and trade-offs that inform economic decision-making. To this end, a key feature of the presented work is the ability to assess the cost–benefit of both controllable pitch propellers and fixed pitch propellers (CPPs and FPPs). This provides advice on when, in terms of WPS installation size, it is worthwhile to install which kind of propeller. CPPs are found to be more suitable for newly built wind-powered ships (>70% wind power), while a conventional FPP is satisfactory for wind-assisted ships (<70% wind power) and retrofitted installations. The results for a 91,373 GT bulk carrier showed that a WPS unloads the propeller and the engine, which leads to an increase in the propulsive efficiency and a detrimental rise of the engine specific fuel oil consumption. However, propeller gains are found to be greater than engine losses, which result in extra savings. Thus, not only does a WPS save fuel and corresponding pollutant emissions, but it also increases the entire propulsive efficiency.
The cybersecurity landscape is evolving, driven by a reinforcing feedback loop of increasingly sophisticated attacks and defences. Threat actors, long benefitting from the asymmetrical “attacker’s advantage” of focused targeting, have now matured their organizational structures to facilitate tactical information sharing, technique specialization, the establishment of markets for buying and selling exploit and vulnerability information, and providing training on how to circumvent detection and defence systems.
Productive activity in the North Sea Region (NSR) is expected to intensify, diversify, and expand further offshore. Pressure to decarbonize and “electrify” the existing and emerging industries of the ocean economies offer an opportunity as the electrification of the seas has captured the imagination of industry and policymakers as a pathway to achieving sustainable growth. Using the methods of morphological analysis, thematic analysis, and structural analysis, this article identifies and reports on six innovation concepts for the electrification of the seas: Charging at wind farms; Charging at fish farms; Charging at thermal-powered platforms; Charging by floating solar panels; Charging at tidal plants; Charging at offshore container terminals. This article provides a base for entrepreneurship by generating insight into the affecting variables for each configuration as well as the identification of the strategic variables. It furthermore contributes a novel methodological approach to produce said understanding. The paper concludes with prospects for the electrification of the seas and charts a pathway for sustainable transition of the ocean economies.