The interest in sustainability in the maritime industry has been on the rise. Attention has shifted from how to develop and comply with environmental regulation and labour standards to a more integrated view on sustainable maritime transport that aims at incorporating sustainability in maritime firm strategies. The liner shipping industry, which has been at the forefront, plays a crucial role in global supply chains, with its commitment to sustainable maritime container transport gaining recognition. In particular, procurement relationships stand out as an area where sustainability can exert the most significant impact. Ocean transport is among the most widely outsourced services globally both by shippers and by freight forwarders. Unlike bulk transport, container ocean transport is always outsourced, as shippers do not use their own vessels. Yet, the selection criteria that logistics firms use regarding sustainability when choosing ocean transport service providers and the role of sustainability in value creation among shippers/freight forwarders and ocean transport providers have been scarcely explored.
This article delves into value creation via quality improvement and sustainability practices in ocean freight transport. Employing a case study of an ocean carrier, alongside interviews and survey data, it explores how liner shipping companies can leverage high-quality and sustainable operations to enhance service for their clients and create logistics value. A novel aspect of this study is the application of sustainable supplier management concepts to maritime logistics, highlighting how shippers’ sustainability requirements in sourcing ocean freight services shape procurement relationships and how shipping companies can employ sustainable procurement strategies for value creation.
Chalk reservoirs, due to their high porosity and very low permeability, represent one of the most interesting cases for engineering studies of carbonates. They exhibit complex fluid-rock interactions because of their reactive surfaces and dense porous medium. The reinjection of produced water is an attractive strategy for managing wastewater flow from oil wells. However, the complex composition of produced water, the reactive nature of carbonate rocks, and their low permeability create challenges related to permeability loss.
This study examines the stages of permeability change during core flooding experiments up to the point of complete clogging. A distinctive feature of this study is the presence of residual oil in the core samples, which simulates real reservoir conditions during produced water reinjection. The presence of residual oil is an additional factor influencing the change in core permeability, but there is no clear consensus in the research community on its impact on permeability during produced water injection.
All experiments were conducted in a core flooding system simulating well conditions in terms of pressure (170 bar) and temperature (70 ◦C). Produced water samples from the Dan field were used to replicate the chemical and thermodynamic processes occurring in a real well. The experiments identified three stages of permeability change: an initial increase in permeability (+12%), a period of pressure stabilization, and a subsequent decrease in permeability (− 8%) due to the formation of inorganic precipitates within the core channels.
The primary objective of the experiments is to investigate the relationship between permeability changes and the stages of reinjection, with a focus on the effects of residual oil. The study focuses on identifying the processes occurring up to the point of complete clogging, considering the impact of residual oil saturation in the chalk core samples. Image analysis using scanning electron microscopy, particle size measurement with a zeta-potential meter, and thermodynamic scale formation modeling with ScaleCERE software were employed to explain these processes.
Three stages of permeability change were identified during the injection of 200 pore volumes of produced water: increased permeability (+12%), pressure stabilization, and decreased permeability (− 8%). The positive influence of residual oil saturation on the filtration and storage properties of the reservoir was established, due to the mobilization of chalk core particles. Additionally, the theory of core channel clogging during the reinjection of formation water by the formation of inorganic precipitates within the channels was confirmed.
Understanding the causes of permeability reduction that occurred during the stage of permeability decrease enables the development of water purification methods specifically targeted at the causes of rock clogging. Predicting the process of injecting a mixture of produced and seawater will help in interpreting the data during disposal operations by injecting formation water into an injection well, and it will allow for the selection of effective measures to mitigate the impact on the reservoir.
As maritime technology advances, multi-energy ship microgrids (MESMs) are widely used in large cruise tourism. In this context, studying cost-effective and highly reliable energy system planning methods for MESMs in their entire lifespan becomes paramount. Therefore, this paper proposes a joint planning method for a MESM during its lifetime. Firstly, a long timescale coordinated planning and operation scheme is formulated with the aim of maximizing the Net Present Value (NPV) value, thereby reducing both project investment and energy supply cost. In addition, this paper introduces novel operation models that incorporate customer thermal comfort levels, considering thermal inertia, and ship navigation, accounting for the effects of waves and wind. These models enhance the flexibility and practicality of the planning process. Finally, to ensure the safe operation of vessels and alleviate the negative effects of uncertain wind and waves during ship navigation, a robust optimization (RO) approach is employed. A case study demonstrates the effectiveness of the proposed method, with several comparison analyzes further highlighting its advantages.
Seaports consume a large amount of energy and emit greenhouse gas and pollutants. Integrated multiple renewable energy systems constitute a promising approach to reduce the carbon footprint in seaports. However, the intermittent nature of renewable resources, stochastic dynamics of the demand in seaports, and unbalanced structure of seaport energy systems require a proper design of energy storage systems. In this paper, a framework for multi-objective optimization of hybrid energy storage systems in stochastic unbalanced integrated multi-energy systems at sustainable mega seaports is proposed to minimize life-cycle costs and minimize carbon emissions. The optimization problem is formulated with reference to the energy management of the integrated multi-energy system at the seaport and considering both distributed and centralized hybrid energy storage configurations. Wavelet decomposition and double-layer particle swarm optimization are proposed to solve the multi-objective optimization problem. The real power system of the largest port worldwide, i.e., the Ningbo Zhoushan Port, was selected as a case study. The results show that, with respect to a situation with no energy storage system, the proposed approach can save 81.29 million RMB in electricity purchases and eliminate approximately 497,186 tons of carbon emissions over the entire lifecycle of the energy storage system. The findings suggest that the proposed hybrid energy storage framework holds the potential to yield substantial economic and environmental advantages within mega seaports. This framework offers a viable solution for port authorities seeking to implement hybrid energy storage systems aimed at fostering greater sustainability within port operations.
The present study investigates three-dimensional gap resonance between two fixed side-by-side barges under combined wave and uniform current excitation using a fully nonlinear numerical wave tank based on the Navier–Stokes equations. It examines how currents aligned with regular waves affect the gap response under head and beam seas. In beam seas, the free surface in the gap primarily exhibits a modal-type response in the form of a standing wave. The maximum gap response, consistently occurring at the midpoint of the gap, increases gradually with the current speed. Conversely, in head seas, the maximum response decreases slightly with increasing current speed, and the occurring location shifts downstream. Moreover, resonant free-surface responses along the gap in head seas manifest as propagating waves rather than modal-type standing waves, consisting of a wider spectrum of wave components around the resonant ones and traveling faster than the incident waves regardless of current speed. The wavelengths of those resonant waves tend to increase with increasing current speed. Additionally, the presence of current significantly enlarges the transverse first-harmonic and mean-drift wave forces on the barges under beam-sea conditions. The study highlights the necessity of considering current effects on three-dimensional gap resonances in marine operations at coastal and offshore locations.
This paper models the large periodic plate structure as Kirchhoff-Love plates and introduces a novel implementation of asymptotic homogenization (NIAH) to enable an efficient calculation of the structural stiffness. Compared to full finite element models, applying NIAH to a unit-cell model greatly reduces computational costs. This paper systematically presents the derivation and finite element formulation of asymptotic homogenization (AH), and the development of NIAH. Benchmark cases, including solid, thin-walled, multi-material plates, and a plate with octagonal holes, are used to validate the NIAH implementation. A series of representative fish cage designs are analyzed to investigate the influence of pontoon components, structural layouts, and material distribution on structural stiffness. To ensure the reliability of the calculations, the choice of unit-cell model and the sensitivity of the results to mesh density and unit-cell size are also discussed.
Background: Medical evacuations (MEDEVACs) from offshore installations are both costly and disruptive. Enhancing worker well-being may help reduce evacuations due to illness or injury, thereby maintaining the smooth operation of offshore activities and lowering financial burdens.
Objectives: This scoping review aims to identify whether illness or injury is the predominant cause of MEDEVACs from offshore oil and gas installations and to determine the most common types of illnesses or injuries involved. Additionally, the review outlines a future research agenda focusing on offshore worker health and well-being.
Materials and methods: A comprehensive structured search was conducted across the Scopus, PubMed, and Web of Science databases, as well as through reference lists and grey
literature. Studies were included if they addressed MEDEVACs from offshore oil and gas installations. Eleven articles met the inclusion criteria.
Results: Articles indicate that non-occupational illnesses are more frequent causes of MEDEVACs than injuries. Among these, chest pain, cardiovascular issues, and dental problems were disproportionately represented. Contractor personnel were more likely to require evacuation than company employees. Additionally, younger workers were more likely to be evacuated due to injuries. Chronic health conditions were more common reasons for MEDEVACs among older workers. The review highlights the significant role of non-communicable diseases in contributing to MEDEVACs, as opposed to occupational exposures.
Conclusions: Investing in preventive health management, targeted research, and workforce education may substantially reduce the prevalence of non-communicable diseases in the offshore environment, lowering MEDEVAC rates, associated costs, and operational disruptions. Further investigation into the underlying causes of ill health among offshore workers is needed to enhance overall workforce well-being.
Fouling release coatings (FRCs) can become damaged and diminished over exposure. Quantifying adverse effect of scratches on FRCs is crucial for damage control. This study investigated the effect of four pre-defined scratches on the re-fouling of a silicone-based FRC (SiFR) undergoing underwater cleaning utilizing a novel automated underwater cleaning system (AUCS). Moreover, barnacle adhesion and coating detachment formation of scratched SiFR were evaluated. Field testing at the CoaST Maritime Test Centre (CMTC) demonstrated that the scratches varying in depths and widths can significantly affect the biofouling behavior and cleaning efficiency of SiFR surface. For wide scratches (i.e. 3-mm-wide), hard fouling (e.g. barnacles, mussels) was more prone to accumulate, and underwater cleaning was effective in preventing hard fouling but not soft fouling on SiFR surface. Additionally, the re-fouling and cleaning difficulty of hard fouling increased with the depth of wide scratches. For narrow scratches (i.e. <50-μm-wide), SiFR was primarily attached by soft fouling (e.g. biofilm, algae), and underwater cleaning performed positive fouling resistance of algae but not biofilm on SiFR surface. Besides, algae became difficult to remove with the depth of narrow scratches. Notably, biweekly cleaning proved to be highly effective in biofouling control of SiFR with narrow and shallow scratches.
Physical model tests are often conducted during the design process of coastal structures. The wave climate in such tests often includes short-crested nonlinear waves. The structural response is related to the incident waves measured in front of the structure. Existing methods for separation of incident and reflected short-crested waves are based on linear wave theory. For analysis of nonlinear waves, the existing methods are limited to separation of nonlinear long-crested waves. For short-crested waves, the only options so far have been to use estimates without the structure in place. The present paper thus presents a novel method for directional analysis of nonlinear short-crested waves: Non-Linear Single-summation Oblique Reflection Separation (NL-SORS). The method is validated on numerical model data, as for such data, the target is well defined as simulations may be performed with fully absorbing boundaries. Second- and third-order wave theory is used to demonstrate that small errors on the celerity of nonlinear components in the mathematical model of the surface elevation can be obtained if a double narrow-banded directional spectrum is assumed, ie the primary frequency and the directional spreading function must be narrow banded. As the increasing nonlinearity of the waves often arise from waves shoaling on a sloping foreshore, the directional spreading of the waves will decrease due to refraction, and a broad directional spreading function will thus not be experienced in highly nonlinear conditions. The new NL-SORS method is shown to successfully decompose nonlinear short-crested wave fields and estimate the directional spectrum thereof.
This chapter introduces the reader to port State jurisdiction in public international law, linking customary law traditions to its utilization in the International Convention for the Prevention of Pollution from Ships (MARPOL). Its provisions are contextualized within their relationship to the United Nations Convention on the Law of the Sea, both historically as a matter of treaty negotiations, and contemporarily as a matter of defining generally accepted international rules and standards for port States regulating vessel-source pollution. Port States play a key role in promoting and evolving the uniform and universal application of MARPOL standards as, by-and-large, minimum global standards. Complementary principles—such as no more favorable treatment—and mechanisms—such as regional port State control memorandums—are highlighted, as well as several relevant implementation strategies, for example, concentrated inspection campaigns.