Enhancing environmental sustainability in maritime shipping has emerged as an important topic for both firms in shipping-related industries and policy makers. Speed optimization has been proven to be one of the most effective operational measures to achieve this goal, as fuel consumption and greenhouse gas (GHG) emissions of a ship are very sensitive to its sailing speed. Existing research on ship speed optimization does not differentiate speed through water (STW) from speed over ground (SOG) when formulating the fuel consumption function and the sailing time function. Aiming to fill this research gap, we propose a speed optimization model for a fixed ship route to minimize the total fuel consumption over the whole voyage, in which the influence of ocean currents is taken into account. As the difference between STW and SOG is mainly due to ocean currents, the proposed model is capable of distinguishing STW from SOG. Thus, in the proposed model, the ship’s fuel consumption and sailing time can be determined with the correct speed. A case study on a real voyage for an oil products tanker shows that: (a) the average relative error between the estimated SOG and the measured SOG can be reduced from 4.75% to 1.36% across sailing segments, if the influence of ocean currents is taken into account, and (b) the proposed model can enable the selected oil products tanker to save 2.20% of bunker fuel and reduce 26.12 MT of CO2 emissions for a 280-h voyage. The proposed model can be used as a practical and robust decision support tool for voyage planners/managers to reduce the fuel consumption and GHG emissions of a ship
The purpose of this paper is to clarify some important issues as regards ship speed optimization at the operational level and develop models that optimize ship speed for a spectrum of routing scenarios in a single ship setting. The paper’s main contribution is the incorporation of those fundamental parameters and other considerations that weigh heavily in a ship owner’s or charterer’s speed decision and in his routing decision, wherever relevant. Various examples are given so as to illustrate the properties of the optimal solution and the various trade-offs that are involved.
There have been a number of recent papers in the literature that investigate the relationship between ship speed and required power, or between ship speed and fuel consumption. Using regression analyses for selected case studies these papers show that in many cases the traditional “cube law” is not valid, and exponents lower than 3 (and in some cases lower than 2 or even below 1) are more appropriate. Perhaps more important, they use these results to derive implications on the validity (or lack thereof) of policies to reduce greenhouse gas (GHG) emissions from ships through slow steaming. This paper reviews some of these papers and shows that their results are partially based on pitfalls in the analysis which are identified. Policy implications particularly on the quest to reduce GHG emissions from ships are also discussed.
The “Initial IMO Strategy” was adopted in the 72nd session of the Marine Environment Protection Committee (MEPC 72) of the International Maritime Organization (IMO) in April 2018. It has set, among other things, ambitious targets to reduce greenhouse gas (GHG) emissions from ships, and purports to express a strong political will to phase them out as soon as possible. The most ambitious of these targets is to reduce GHG emissions by 2050 at least 50% vis-à-vis 2008 levels, and there is also an intermediate target to reduce CO2 emissions per transport work by 2030 at least 40%, again vis-à-vis 2008 levels. More than three years since the adoption of the Initial IMO Strategy, this chapter takes stock at the status of shipping decarbonisation and attempts to assess prospects for the future. Obstacles towards achieving the IMO targets are identified and discussed.
The “Initial IMO Strategy” was adopted in the 72nd session of the Marine Environment Protection Committee (MEPC 72) of the International Maritime Organization (IMO) in April 2018. It has set, among other things, ambitious targets to reduce greenhouse gas (GHG) emissions from ships, and purports to express a strong political will to phase them out as soon as possible. The most ambitious of these targets is to reduce GHG emissions by 2050 at least 50% vis-à-vis 2008 levels, and there is also an intermediate target to reduce CO2 emissions per transport work by 2030 at least 40%, again vis-à-vis 2008 levels (IMO, 2018). In the period after MEPC 72, the focus of the IMO discussion has been on the formulation and eventual adoption of the short-term measures, that is, measures that are to be agreed upon and implemented by 2023. In fact, MEPC 76, held in June 2021, and after a rather difficult discussion, adopted such a short-term measure. MEPC 77 (November 2021) saw the initiation of the discussion on mid-term and long-term measures, which include, among others, market based measures (MBMs) and alternative fuels. The discussion continued at MEPC 78 (June 2022) and is expected to continue at future meetings of MEPC.
The purpose of this short paper is to provide a brief and non‐encyclopedic commentary on the decisions made at IMO MEPC 76 (June 2021) and assess the prospects for the future of shipping decarbonization in the aftermath of that meeting. The recent action of the European Commission to include shipping into the EU Emissions Trading System (ETS) is also discussed.
In this article, the author describes how the creation of the Danish maritime museums in 1915 and 2013 – both generously funded by maritime foundations and actors – was perceived by the shipping industry as initiatives that would help market the industry in the eyes of the public. He argues more generally that national maritime museums constitute focal points for disseminating narratives that legitimate maritime activities and establish these activities as symbols of national identities. It is suggested that maritime historians, curators and scholars reflect on the relationship between maritime industry actors and museum exhibition narratives, and consider the interests and capital that potentially underpin museums’ and curators’ decisions.
Danish seine is an active fishing gear targeting demersal species, such as European plaice (Pleuronectes platessa, hencefort referred as plaice), a commercially important fish species in the North Sea, Skagerrak, Kattegat, and Baltic Sea. Danish seining is a relevant fishery in relation to exemption from the European Union landing obligation. Trials were conducted from a commercial fishing vessel during the summer with high air temperatures and sea salinity and marked salinity and temperature gradients (pycnocline). Video equipment was used to observe fish entering the seine. Captured fish were individually tagged and housed in livewells for ten days to observe short-term survival. Reflex impairments and external injuries were assessed after capture and at the end of the observation periods using reflex action mortality predictor (RAMP) and catch-damage index (CDI) methodologies. We found that plaice entered the seine late in the towing process and that 87 % of the assessed fish survived, after 10 days of observation. There was a significant difference in short-term survival curves for fish that had been subjected to more than 30 min of on-deck during the catch-sorting process relative to those that had remained on deck for 30 min or less. The association between the time on deck and RAMP scores after capture was also significant. External injuries were primarily minor bruises, fin fraying, and net marks and changed little from after capturing to the end of the observation period.
We present a Spectral Element Fully Nonlinear Potential Flow (FNPF-SEM) model developed for the simulation of wave-body interactions between nonlinear free surface waves and impermeable structures. The solver is accelerated using an iterative p-multigrid algorithm. Two cases are considered: (i) a surface piercing box forced into vertical motion creating radiated waves and (ii) a rectangular box released above its equilibrium resulting in freely decaying heave motion. The FNPF-SEM model is validated by comparing the computed hydrodynamic forces against those obtained by a Navier-Stokes solver. Although not perfect agreement is observed the results are promising, a significant speedup due to the iterative algorithm is however seen.