The present paper deals with separation of long-crested regular waves into incident and reflected components. Such methods have been available for several decades for linear waves, but have recently been extended to cover nonlinear waves over horizontal foreshores. The overall goal of the present paper is to extend the separation method for nonlinear regular waves to also cover sloping foreshores. This requires the combination of the existing method with a nonlinear shoaling model. A nonlinear shoaling model was very recently found valid for the shoaling of the primary and bound components in regular waves when the slope angle is positive and mild. In the present paper this shoaling model is utilized and assumed valid also for the de-shoaling of the reflected waves, ie on a negative mild slope angle. However, if the reflected waves are nonlinear the de-shoaling process is much more complicated and will for example cause the release of free waves. Interactions among those free reflected wave components may cause nonlinear interactions not included in the mathematical model. For that reason, the applicability range is limited to mildly nonlinear reflected waves. Using numerical model data with various foreshore slopes, wave nonlinearities and reflection coefficients the reliability of the developed model is examined in detail.
Numerical models used in the design of floating bodies routinely rely on linear hydrodynamics. Extensions for hydrodynamic nonlinearities can be approximated using eg Morison type drag and nonlinear Froude-Krylov forces. This paper aims to improve the approximation of nonlinear forces acting on floating bodies by using machine learning (ML). Many ML models are general function approximators and therefore suitable for representing such nonlinear correction terms. A hierarchical modeling approach is used to build mappings between higher-fidelity simulations and the linear method. The ML corrections are built up for FNPF, Euler and RANS simulations. Results for decay tests of a sphere in model scale using recurrent neural networks (RNN) are presented. The RNN algorithm is shown to satisfactorily predict the correction terms if the most nonlinear case is used as training data. No difference in the performance of the RNN model is seen for the different hydrodynamic models.
The wave loads and the resulting motions of floating wave energy converters are traditionally computed using linear radiation–diffraction methods. Yet for certain cases such as survival conditions, phase control and wave energy converters operating in the resonance region, more complete mathematical models such as computational fluid dynamics are preferred and over the last 5 years, computational fluid dynamics has become more frequently used in the wave energy field. However, rigorous estimation of numerical errors, convergence rates and uncertainties associated with computational fluid dynamics simulations have largely been overlooked in the wave energy sector. In this article, we apply formal verification and validation techniques to computational fluid dynamics simulations of a passively controlled point absorber.
The phase control causes the motion response to be highly nonlinear even for almost linear incident waves. First, we show that the computational fluid dynamics simulations have acceptable agreement to experimental data. We then present a verification and validation study focusing on the solution verification covering spatial and temporal discretization, iterative and domain modelling errors. It is shown that the dominating source of errors is, as expected, the spatial discretization, but temporal and iterative errors cannot be neglected. Using hexahedral cells with low aspect ratio and 30 cells per wave height, we obtain results with less than 5% uncertainty in motion response (except for surge) and restraining forces for the buoy without phase control. The amplified nonlinear response due to phase control caused a large increase in numerical uncertainty, illustrating the difficulty to obtain reliable solutions for highly nonlinear responses, and that much denser meshes are required for such cases.
Large volumes of produced water are being discharged globally as byproducts of oil production. Commercial production chemicals are conventionally needed to avoid problems such as bacterial growth, pipe corrosion, and oil/water separation issues. These chemicals will partition between oil and water phases and may affect both treatment processes and the environmental impact when water is discharged to the ocean after treatment. Capillary zone electrophoresis is used to measure partitioning coefficients of oilfield chemicals when these are dissolved in the water phase and in contact with either octanol or crude oil. The technique is fast and, due to simplicity, could have merits as on-site assessment of the partition coefficient for direct assessment of the fate of chemicals. The method was first qualified by estimating partitioning coefficients of aliphatic carboxylic acids and chemicals with a molecular structure similar to those of some production chemicals. Subsequently, the coefficients were determined for two different commercial corrosion inhibitors and a biocide that are used in the oilfield as production chemicals. The results showed that the chemicals predominantly preferred to remain in the water phase after contact with either octanol or crude oil. The partitioning coefficients log(p) spanned between −0.36 and −1.68 in the case of water/octanol contact and between 2.68 and −1.41 in the case of water/crude oil contact. One of the corrosion inhibitors exhibited a significant difference in the partitioning depending on whether the organic phase was octanol or crude oil. The chemical had a preference for the water phase in the case of the former but a preference for the crude oil phase in the case of the latter. The result demonstrates that it makes it challenging to evaluate the use of partitioning coefficients for oilfield applications.
Ocean acidification (OA) is a global problem with profoundly negative environmental, social and economic consequences. From a governance perspective, there is a
need to ensure a coordinated effort to directly address it. This study reviews 90 legislative documents from 17 countries from the European Economic Area (EEA) and
the UK that primarily border the sea. The primary finding from this study is that the European national policies and legislation addressing OA is at best uncoordinated. Although OA is acknowledged at the higher levels of governance, its status as an environmental challenge is greatly diluted at the European Union Member
State level. As a notable exception within the EEA, Norway seems to have a proactive approach towards legislative frameworks and research aimed towards further
understanding OA. On the other hand, there was a complete lack of, or inadequate reporting in the Marine Strategy Framework Directive by the majority of the EU
Member States, with the exception of Italy and the Netherlands. We argue that the problems associated with OA and the solutions needed to address it are unique and
cannot be bundled together with traditional climate change responses and measures. Therefore, European OA-related policy and legislation must reflect this and
tailor their actions to mitigate OA to safeguard marine ecosystems and societies. A stronger and more coordinated approach is needed to build environmental,
economic and social resilience of the observed and anticipated changes to the coastal marine systems.
The accelerated melting of the Arctic ice leads to the navigation of the Northern Sea Route (NSR) linking Asia and Europe, shortening transport channel between China and the European Union (EU). This has a significant impact on the China-EU bilateral trade which is analyzed in the present study. We present a framework based on a general equilibrium model for analyzing the impact of the NSR on the trade and the economies of China and the EU. Different fuel cost scenarios, consisting of fuel prices and sailing speeds on ice, are also considered. Specifically, we measure the changes in shipping costs between China and the EU, brought about by NSR navigation. These are used as a basis to quantify changes in transport technology. The Global Trade Analysis Project (GTAP) model is used to predict the trade and economic impacts. The results show that the NSR can save 0.98% in shipping costs and generate an increase in the exports of China and the EU in the order of 14,986 and 8,228 million US dollars, respectively. Among these exports, the mining industry shows the fastest growth, while the electronics industry experiences the largest increase in trade volume. Our findings reveal the potential of the NSR as an alternative route and its positive impact on bilateral trade between China and the EU. The results can provide a basis for shipping companies and governments to make decisions regarding the use of Arctic routes.
Different port operating policies have the potential to reduce emissions from shipping; however, their efficacy varies for different ports. This article extends existing literature to present a consistent and transferable methodology that examines emissions reduction port policies based on ship-call data. Carbon dioxide (CO2); sulphur dioxide (SO2); nitrogen oxides (NOx); and black carbon (BC) emissions from near-port containership activities are estimated. Two emissions reduction policies are considered for typical container terminals. Participation of all calling vessels with a speed reduction scheme can lead to reductions of 8–20 per cent, 9–40 per cent and 9–17 per cent for CO2, SO2 and NOx, respectively. However, speed reduction policies may increase BC emissions by up to 10 per cent. Provision of Alternative Marine Power (AMP) for all berthing vessels can reduce in-port emissions by 48–70 per cent, 3–60 per cent, 40–60 per cent and 57–70 per cent for CO2, SO2, NOx and BC, respectively. The analysis shows that emissions depend on visiting fleet, berthing durations, baseline operating pattern of calling ships, sulphur reduction policies in force and the emissions intensity of electricity supply. The potential of emissions reduction policies varies considerably across ports making imperative the evaluation and prioritization of such policies based on the unique characteristics of each port and each vessel.
Our recent experimental investigations of flexible side-by-side blades under both steady and unsteady flows have observed flutter in both scenarios. Flutter significantly impacts blade kinematics and the hydrodynamic drag experienced by the blades. Our numerical approach [1], utilizing the reactive force model, successfully reproduces flutter phenomena. In contrast, the traditional Morison’s equation fails to trigger flutter. In the static regime where flutter does not occur, the bulk drag coefficients calibrated from experiments in steady and unsteady flows can be unified through an effective Cauchy number, allowing for the use of analytical models developed for steady flows in unsteady flows. In the flutter regime, using the bulk drag coefficient from steady flows underestimates the drag load in oscillatory flow.
Mooring systems are required to keep floating wave energy converters (WECs) on station. The mooring concept might impact the performance of the WEC, its cost and its integrity. With the aim of clarifying the pros and cons of different mooring designs, we present the results from physical model experiments of three different mooring concepts in regular and irregular waves, including operational and survival conditions. The parameters investigated are the tension in the cables, the motions of the device in the different degrees of freedom and the seabed footprint in each case. We can see that the mooring system affects the performance of the wave energy converter, but the magnitude of the impact depends on the parameter analysed, on the mode of motion studied and on the conditions of the sea. Moreover, different configurations have similar performances in some situations and the choice of one over another might come down to factors such as the type of soil of the seabed, the spacing desired between devices, or environmental impacts. The results of our experiments provide information for a better selection of the mooring system for a wave energy converter when several constraints are taken into account (power production, maximum displacements, extreme tensions, etc).
This study concerns nitrogen based emissions from a hydrogen enriched ammonia fueled SI engine. These emissions deserve special attention as their formation may differ from conventional HC combustion due to the nitrogen content in the fuel. A range of experiments are conducted with a single cylinder 0.612 l CFR engine with a compression ratio varying from 7 to 15 using a fuel composition of 80 vol% NH3 and 20 vol% H2. Wet exhaust samples are analysed with an FT-IR. Emission measurements reveal that nitric oxide stem from other reaction paths than the dissociation of molecular nitrogen. This causes the NO emissions to peak around 35% rather than 10% excess air, as is typical in HC fueled SI-engines. However the magnitude of NO emissions are comparable to that of measurements conducted with gasoline due to lower flame temperatures. Nitrogen dioxide levels are higher when comparing with gasoline, but has a relatively low share of the total NOx emissions (3–4%). Nitrous oxide is a product of NH2 reacting with NO2 and NH reacting with NO. The magnitude is largely affected by ignition timing due to the temperature development during expansion and the amount of excess air, as increased oxygen availability stimulates the formation of the NH2 radical and the levels of NO2 are higher. Under ideal operating conditions (MBT ignition timing) N2O levels are very low. The dominating contributors to unburned ammonia are chamber crevices as the magnitude of these emissions is greatly affected by the compression ratio. However, levels are lower than required in order to eliminate all NOx emissions with a SCR catalyst.