The integration of offshore wind assets with green hydrogen production and storage units can offer a much-needed solution for intermittency and curtailment issues of the offshore energy industry. To gain confidence that such novel integrated assets will be fit for purpose, the present study presents a comprehensive risk assessment followed by an action plan to mitigate the identified risks to help facilitate their technology qualification. The new methodology introduced here involves all the life-cycle phases of an offshore green hydrogen production system. Following, prevailing failure modes, their effects, and their causes are identified through an extensive review of relevant literature. Subsequently, risk prioritization is performed by ranking the criticality scores obtained from a multidisciplinary group of experts to the questionnaire designed to reveal the chosen subsystems' technology readiness, degree of change, concern in manufacturing and operation, and potential consequences regarding occupational health, safety, environment, economic and regulatory.
The expansion of Carbon Capture, Utilization, and Storage (CCUS) highlights the growing need for carbon dioxide (CO2) pipeline transportation. While pure CO2 is non-corrosive, impurities such as H2O and NO2 create a corrosive environment that risks pipeline integrity. This study investigates how H2O and NO2 concentrations, along with temperature, influence corrosion under CO2 pipeline conditions. The investigation was performed in an autoclave setup emulating a linear velocity of 0.96 m/s at 100 bar and temperatures of 5 °C and 25 °C, testing X52 and GR70, and a more corrosion-resistant 9Cr alloy. The results indicated that the presence of NO2 elevated the corrosion rate compared to scenarios without. Low H2O concentration led to a corrosion rate of up to five times higher at 5 °C, compared to at 25 °C, in the presence of NO2. Low to moderate corrosion was observed for the carbon steels without NO2 and with 70 ppmv H2O at both temperatures. Reducing the H2O concentration below 70 ppmv and removing NO2, while SO2 and O2 are present, will only result in low to moderate corrosion in the carbon steel CO2 pipeline. The corrosion rate for X52 and GR70 was 0.065 mm/y and 0.016 mm/y higher or 5 and 3 times greater, respectively, at 5 °C compared to 25 °C. The study concludes that H2O should be maintained below 70 ppmv and NO2 should be eliminated to prevent severe corrosion. Emphasizing the importance of CO2 specification compliance and the need for further research into CO2 compositions that align with the specifications.
Climate change is affecting the oceans with increased sea levels, ocean acidification and extreme weather affecting coastal ecosystems. This necessitates a new model for climate and marine law, because existing law and policy are insufficient to tackle adaptation and mitigation impacts upon the marine environment. Presently, we do not know what it takes to integrate and balance climate legislation and governance when faced with unknown problems. The concept of Blue Economy is new and originates from the United Nations Conference on Sustainable Development. This chapter explores how one can best build new knowledge that can integrate climate law and marine governance. It does so by proposing the creation of a nexus between ecosystem-based regulations and marine spatial planning in order to create a new paradigm for effective and inclusive Blue Economy, using a systemic multi-regulatory framework (Global, Regional and National).
Since time-domain simulations of wave energy converters are computationally expensive, how can we analyse their dynamics and test wide ranges of design variables, without simplifying the physics involved? One possible solution is the use of General Polynomial Chaos (gPC). GPC provides computationally efficient surrogate models for partial differential equation based models, which are particularly useful for sensitivity analysis and uncertainty quantification. We demonstrate the application of gPC to study the dynamics of a wave energy converter in an operational sea-state, when there is uncertainty in the values of the stiffness and damping coefficient of the power take-off.
The design of wave energy converters should rely on numerical models that are able to estimate accurately the dynamics and loads in extreme wave conditions. A high-fidelity CFD model of a 1:30 scale point-absorber is developed and validated on experimental data. This work constitutes beyond the state-of-the-art validation study as the system is subjected to 50-year return period waves. Additionally, a new methodology that addresses the well-known challenge in CFD codes of mesh deformation is successfully applied and validated. The CFD model is evaluated in different conditions: wave-only, free decay, and wave–structure interaction. The results show that the extreme waves and the experimental setup of the wave energy converter are simulated within an accuracy of 2%. The developed high-fidelity model is able to capture the motion of the system and the force in the mooring line under extreme waves with satisfactory accuracy. The deviation between the numerical and corresponding experimental RAOs is lower than 7% for waves with smaller steepness. In higher waves, the deviation increases up to 10% due to the inevitable wave reflections and complex dynamics. The pitch motion presents a larger deviation, however, the pitch is of secondary importance for a point-absorber wave energy converter.
This work presents the verification and validation of the freely available simulation tool MoodyMarine, developed to help meet some of the demands for early stage development of MRE devices. MoodyMarine extends the previously released mooring module MoodyCore (Discontinuous Galerkin Finite Elements) with linear radiation-diffraction bodies, integrated pre-processing workflows and a graphical user interface. It is a C++ implementation of finite element mooring dynamics and Cummins equations for floating bodies with weak nonlinear corrections. A newly developed nonlinear Froude-Krylov implementation is verified in the paper, and MoodyMarine is compared to CFD simulations for two complex structures: a slack-moored floating offshore wind turbine and a self-reacting point-absorber with hybrid mooring.
A novel damping system is developed to address offshore wind turbine tower vibration exacerbated by global warming-induced coastal extreme weather. Through parametric optimization, it stabilizes nacelle displacement under normal loads and reduces responses in diverse wind conditions: 18.8% max bending stress reduction during gusts, 26.3% nacelle displacement mitigation under high turbulence, and 7.9% displacement standard deviation reductions in 50-year extreme winds. A Norwegian wind farm extends tower life by 44% at the tower top and 99.36% at the tower base. Under varying gust angles, it reduces nacelle displacement (4.3%) and bottom bending moment (3.2%), enhancing structural stability. These demonstrate their potential to cut maintenance costs and extend lifetime, which is crucial for offshore wind turbine development.
When an offshore wind power plant is connected to the grid, there is a risk of amplification of certain harmonics and appearance resonances at the point of connection due to the interaction between the grid network and the wind power plant network. Hence, the plant developer is obliged to maintain the harmonic distortion at the point of common coupling within the planning level limits using harmonic compensation, which is usually done by passive filters. In this paper a novel active harmonic compensation technique using voltage feedback from a non-local bus has been proposed and analyzed. Its effectiveness has been demonstrated through real time simulations on a test system model.
Physical wave basin tests with a focus on uncertainty estimation have been conducted on a sphere subjected to wave loads at Aalborg University as part of the effort of the OES Wave Energy Converters Modeling Verification and Validation (formerly, OES Task 10) working group to increase credibility of numerical modeling of WECs. The tests are referred to as the Kramer Sphere Cases, and the present note is dealing with wave excitation force tests on a fixed model. The present note is including details to facilitate CFD models which replicate the physical setup in detail.
Physical wave basin tests with a focus on uncertainty estimation have been conducted on a fixed sphere subjected to wave loads at Aalborg University as part of the effort of the OES Wave Energy Converters Modeling Verification and Validation (formerly, OES Task 10) working group to increase credibility of numerical modeling of WECs.
The present note defines an idealized test case formulated to accurately represent the physical tests in a simple way. The test case consists of a fixed, rigid sphere half submerged in water subjected to regular waves of three different levels of linearity. The objective of the present note is to allow for numerical tests of the idealized test case.