To mitigate climate change due to international shipping, the International Maritime Organization (IMO) requires shipowners and ship technical managers to improve the energy efficiency of ships’ operations. This paper studies how voyage planning and execution decisions affect energy efficiency and distinguishes between the commercial and nautical components of energy efficiency. Commercial decisions for voyage planning depend on dynamic market conditions and matter more for energy efficiency than nautical decisions do for voyage execution. The paper identifies the people involved in decision-making processes and advances the energy-efficiency literature by revealing the highly networked nature of agency for energy efficiency. The IMO’s current energy efficiency regulations fail to distinguish between the commercial and nautical aspects of energy efficiency, which limits the ability to mitigate climate change through regulatory measures. Policymakers should expand their regulatory focus beyond shipowners and technical managers to cargo owners to improve energy efficiency and reduce maritime transport emissions.
Maritime transport carries around 80% of the world’s trade. It is key to the economic development of many countries, it is a source of income in many countries, and it is considered as a safe and environment friendly mode of transport. Given its undisputed importance, a question is what does the future hold for maritime transport. This chapter is an attempt to answer this question by mainly addressing the drive to decarbonize shipping, along with related challenges as regards alternative low carbon or zero carbon marine fuels. The important role of maritime policy making as a main driver for change is also discussed. Specifically, if maritime transport is to drastically change so as to meet carbon emissions reduction targets, the chapter argues, among other things, that a substantial bunker levy would be the best (or maybe the only) way to induce technological changes in the long run and logistical measures (such as slow steaming) in the short run. In the
long run this would lead to changes in the global fleet towards vessels and technologies that are more energy efficient, more economically viable and less dependent on fossil fuels than those today. In that sense, it would have the potential to drastically alter the face of maritime transport in the future. However, as things stand, and mainly for political reasons, the chapter also argues that the adoption of such a measure is considered as rather unlikely.
The shipping industry is associated with approximately three quarters of all world trade. In recent years, the sustainability of shipping has become a public concern, and various emissions control regulations to reduce pollutants and greenhouse gas (GHG) emissions from ships have been proposed and implemented globally. These regulations aim to drive the shipping industry in a low-carbon and low-pollutant direction by motivating it to switch to more efficient fuel types and reduce energy consumption. At the same time, the cyclical downturn of the world economy and high bunker prices make it necessary and urgent for the shipping industry to operate in a more costeffective way while still satisfying global trade demand. As bunker fuel bunker (e.g., heavy fuel oil (HFO), liquified natural gas (LNG)) consumption is the main source of emissions and bunker fuel costs account for a large proportion of operating costs, shipping companies are making unprecedented efforts to optimize ship energy efficiency. It is widely accepted that the key to improving the energy efficiency of ships is the development of accurate models to predict ship fuel consumption rates under different scenarios. In this study, the ship fuel consumption prediction models presented in the literature (including the academic literature and technical reports, which are a typical type of “grey literature”) are reviewed and compared, and models that optimize ship operations based on fuel consumption prediction results are also presented and discussed. Current research challenges and promising research questions on ship performance monitoring and operational optimization are identified.
The increasing focus on energy efficient operation of vessels can be seen in both legislation and research. This paper focuses attention on the human factor influencing energy efficiency and explores the conditions for improving energy efficiency in working vessels taking situational awareness (SA) theory into consideration.
The study builds on two cases: an offshore supply vessel for the oil & gas industry and an installation vessel for wind turbines. The study used qualitative methods based on 49 interviews with seafarers and onshore employees from the vessels and shipping companies.
The study has identified that the energy efficiency of a ship is mainly influenced by legislation and the praxis formed on board. The results showed that the theory on SA is very a useful tool in explaining the factors affecting the energy efficiency of a vessel and the praxis.
The study has shown that obtaining a more energy efficient operation is complex and depends not only on the officer on board the ship. The improvement of energy efficiency is possible, but there is a need to understand the complexity of the issue and to involve both the crew and the entire system around the ship, and to obtain a shared perspective of energy efficient operation. Furthermore, in order to improve energy efficiency in shipping companies, there is a need to support the seafarers in gaining more skills for operating the ship more energy efficiently; to do this the right way there is a need to create an understanding of the system by the authorities, ship owners and charterers.
This paper examines the stability of a weak island namely Sumbawa-Lombok of Indonesian grid, interconnected with two infeed HVDC links facilitating 2 x 120 MW power transfer from Sumba and Flores Island. Through power flow, short circuit, small signal stability, resonance stability, and transient stability analyses, it is demonstrated that the existing infrastructure fails to support such transfer due to voltage drops, overloading, and stability limitations. Upgrading to 150 kV and its subsequent component resolves the small-signal and transient stability constraint as its grid strength is increasing. The current findings underscore that the primary limitation lies in the grid's infrastructure, not in dynamic or control constraints. The current result establishes the need for strategic grid reinforcements to support HVDC integration in weak systems and sets the stage for future research on optimizing the extent of such reinforcements.
This paper investigates the challenges associated with remote harmonic compensation in offshore wind power plants through long cables and transformers. The interaction between the grid network and the wind power plant network can lead to the amplification of certain harmonics and potentially resonant conditions. Hence, the plant developer is required to maintain the harmonic distortion at the point of common coupling within the planning level limits using harmonic compensation, which is usually done by static filters. In this paper an active damping compensation strategy with a STATCOM using emulation of using emulation of resistance at the harmonic frequencies of concern is analyzed. Finally the results are demonstrated using time domain simulations in PSCAD.
When an offshore wind power plant is connected to the grid, there is a risk of amplification of certain harmonics and appearance resonances at the point of connection due to the interaction between the grid network and the wind power plant network. Hence, the plant developer is obliged to maintain the harmonic distortion at the point of common coupling within the planning level limits using harmonic compensation, which is usually done by passive filters. In this paper a novel active harmonic compensation technique using voltage feedback from a non-local bus has been proposed and analyzed. Its effectiveness has been demonstrated through real time simulations on a test system model.
The share of renewables in the power system is increasing rapidly. Large offshore wind power plants (OWPPs) are developed at a high pace and conventional fossil fuel-based plants are decommissioned. If the OWPP gets islanded due to any contingency or in the event of a blackout, the whole OWPP will be shutdown. This paper proposes a STATCOM with a battery storage that is located at the point of common connection to an OWPP to enable OWPP energization from a fully discharged state to operate in islanded mode. The STATCOM functionality provides fast and dynamic reactive power management and the battery unit provides active power balancing capability to regulate the frequency in the island. The concept is demonstrated through time-domain simulations on an OWPP model in PSCAD. The results confirm the technical feasibility of the system.
The share of renewables in the power system is increasing rapidly. Large offshore wind power plants (OWPPs) are developed at a high pace and conventional fossil fuel-based plants are decommissioned. Consequently, there will be a risk of insufficient amount of power plants providing black start functionality for system restoration after a black out. This paper proposes a STATCOM with a battery energy storage that is located at the point of common connection to an OWPP that together can provide a reliable black start service to the power grid. The concept is demonstrated by using time domain simulations in PSCAD. The STATCOM functionality provides fast and dynamic reactive power management and the battery unit provides active power balancing capability to maintain the frequency within a tolerable range specified by the system operator. The simulation results fulfill the success criteria for the black start and confirm its feasibility for practical implementation.
Due to the presence of long high voltage cable networks, and power transformers for the grid connection, the offshore wind power plants (OWPPs) are susceptible to harmonic distortion and resonances. The grid connection of OWPP should not cause the harmonic distortion beyond the permissible limits at the point of common coupling (PCC). The resonance conditions should be avoided in all cases.
This paper describes the harmonic analysis techniques applied on an OWPP network model. A method is proposed to estimate the harmonic current compensation from a shunt-connected active power filter to mitigate the harmonic voltage distortion at the PCC. Finally, the harmonic distortions in the compensated and the uncompensated systems are compared to demonstrate the effectiveness of the compensation.