This study investigates the appropriate port governance model for implementation of green port management (GPM) practices. Relying on social systems engineering principles, we propose a multi-criteria decision-making (MCDM) framework considering four port governance models and five major GPM practice indicators. We validate the MCDM framework using survey data collected from top management executives of three ports in the Indian Ocean Rim — Bangladesh, Sri Lanka and Tanzania. We compare the Analytic Network Process (ANP) method with more recently developed Best-Worst Method (BWM) in analysis of the MCDM problem of finding the right port governance model for GPM. We collect data using the ANP and BWM survey in January 2019 and August 2019, respectively, from the same respondents. While participating in the study in January 2019, the respondents did not know that they would respond to the same MCDM problem using a different model, which corresponds to a repeated measures experimental design. In both analyses, we find that increasing privatization in port governance would enhance the implementation of GPM practices. Our study furthermore suggests that BWM is a reliable MCDM method with greater applicability than ANP, as it requires significantly lower number of judgement comparisons.
Background
The Maritime Labour Convention, 2006 (MLC2006) entered into force in August 2013 and is a milestone for better working and living conditions (WLC) for seafarers. As of March 2020, 96 countries have ratified the MLC2006, covering more than 90% of the world’s shipping fleet. A system of port state control (PSC) allows ratifying countries to inspect any foreign ship arriving in their ports for compliance with the convention. It is intended as a second safety measure for the identification of substandard ships that sail all over the world. Nine regional agreements, so-called Memoranda of Understanding (MoU), have been signed to coordinate and standardize PSC inspections and to increase efficiency by sharing inspections and information. This paper uses public PSC statistics to evaluate the impact of the MLC2006.
Methods
A preliminary analysis using registered tonnage and MLC2006 ratification was conducted and seven MoU were selected for the analysis. The annual reports of these MoU have been viewed in September 2019. Numbers on annual inspections, deficiencies and detentions and in particular data for deficiencies related to living and working conditions and certificates and documents, have been extracted and analyzed for the years 2010 to 2017.
Results
Across the eight-year period analyzed, inspection numbers remained stable among all MoU authorities. Deficiencies overall and deficiencies related to WLC declined, indicating an improvement in conditions overall and an increased focus on seafarers’ conditions on board. After the MLC2006 entered into force, three MoU reported WLC-ratios above 14%, while the numbers didn’t rise above 10% in the other four authorities. Deficiencies related to certificates and documents did not rise significantly between 2010 and 2017. Two European MoU showed the highest ratios for deficiencies in both categories analyzed.
Conclusion
The analysis confirmed that an increasing attention is being paid to the inspection of working and living conditions, especially in European countries. However, a clear positive impact of the MLC2006 could not be determined from the PSC statistics in this analysis. A large variation still exists among the MoU, a fact that demands increased efforts for harmonization of PSC procedures.
The existence of a sense of common or community interests is a prerequisite to establishing an order in a society, national or international. In this connection, it is notable that the protection of community interests is increasingly important in international law and the law of the sea is no exception. The increasing need for protecting community interests necessitates a new paradigm in the law of the sea. The legal issues regarding the marine Arctic should also be considered in the context of changing paradigms in the law of the sea. Thus this article seeks to overview principal issues of the international law governing the marine Arctic from the viewpoints of a dual paradigm, that is, the law of divided oceans (paradigm I) and the law of our common ocean (paradigm II).
A conceptual design framework for collision and grounding analysis is proposed to evaluate the crashworthiness of double-hull structures. This work attempts to simplify the input parameters needed for the analysis, which can be considered as a step towards a design-oriented procedure against collision and grounding. Four typical collision and grounding scenarios are considered: (1) side structure struck by a bulbous bow, (2) side structure struck by a straight bow, (3) bottom raking, (4) bottom stranding. The analyses of these scenarios are based on statistical data of striking ship dimensions, velocities, collision angles and locations, as well as seabed shapes and sizes, grounding depth and location. The evaluation of the damage extent considers the 50- and 90-percentile values from the statistics of collision and grounding accidents. The external dynamics and internal mechanics are combined to analyse systematically the ship structural damage and energy absorption under accidental loadings.
Due to environmental and economic issues as well as the high performance of marine vessels, efficient energy using has been becoming more demanding. Also, in order to have a zero-emission ship, the utilization of a fuel cell combined with energy storage such as batteries gets more and more attention. In this work, a zero-emission hybrid energy system, including fuel cells, batteries, and cold-ironing, is employed to have an environmentally friendly vessel, and to create condition in which ship operates with high performance, both energy management and components sizing of fuel cells and batteries using real data of ferry boat and intelligent optimization method are done simultaneously. In addition, all constraints related to energy management and component sizing with the topography of the boat and electric power sources are represented and analyzed thoroughly. Ultimately, hourly energy management and component sizing for one specific day are considered in this work, and to optimize this problem, the Improved Sine Cosine Algorithm (ISCA) is utilized. According to obtained results, the proposed energy management and component sizing result in the high-performance ship which could be utilized in the marine industry.
Nowadays, sea traveling is increasing due to its practicality and low-cost. Ferry boats play a significant role in the marine tourism industry to transfer passengers and tourists. Nevertheless, traditional ferry ships consume massive amounts of fossil fuels to generate the required energy for their motors and demanded loads. Also, by consuming fossil fuels, ferries spatter the atmosphere with CO2 emissions and detrimental particles. In order to address these issues, ferry-building industries try to utilize renewable energy sources (RESs) and energy storage systems (ESSs), instead of fossil fuels, to provide the required power in the ferry boats. In general, full-electric ferry (FEF) boats are a new concept to reduce the cost of fossil fuels and air emissions. Hence, FEF can be regarded as a kind of dc stand-alone microgrid with constant power loads (CPLs). This article proposes a new structure of a FEF ship based on RESs and ESSs. In order to solve the negative impedance induced instabilities in dc power electronic based RESs, a new intelligent single input interval type-2 fuzzy logic controller based on sliding mode control is proposed for the dc-dc converters feeding CLPs. The main feature of the suggested technique is that it is mode-free and regulates the plant without requiring the knowledge of converter dynamics. Finally, we conduct a dSPACE-based real-time experiment to examine the effectiveness of the proposed energy management system for FEF vessels.
With expanding human uses at sea, the objective of maritime spatial planning (MSP) to promote sustainable coexistence between marine uses becomes an increasingly challenging task. In order to assess coexistence options, both use-use interactions and use-environment interactions are important to explore. Tools for doing cumulative impact assessments (CIA) on the environment provide a means for spatially exploring environmental impacts. Finding inspiration in such ecosystem-based spatial use-environment approaches while drawing on pairwise marine use compatibility knowledge from existing literature, a spatial approach to model potential synergies and conflicts between marine uses through an expert-based scoring system is presented and implemented in SEANERGY, an ArcMap-based opensource toolbox. A test based on Baltic Sea GIS data demonstrates how SEANERGY supplements CIA analyzes with knowledge about potential use-use synergies, potential use-use conflicts, and their spatial extents, useful for optimizing the use of marine space in MSP without putting too much cumulative pressure on the environment.
Existing active absorption systems do not take into account the spurious waves caused by the segmentation of the wavemaker. Thus, the theoretical estimated performance curves for oblique waves are only valid for infinitely narrow segments. In the present paper, it is demonstrated that by ignoring the spurious waves, an unstable system might be designed for box‐mode paddles (piecewise constant segmentation). For vertical hinged pistons (piecewise linear segmentation), the results are the opposite, as the stability of the system is improved at high frequencies when a finite paddle width is considered. It is also shown that finite discretization leads to a directional influence in the system, even for a pseudo‐3D active absorption system. This effect is more pronounced for vertical hinged systems compared to box‐mode paddles.
The paper outlines a rational design procedure for bridge piers and pylons against ship collision impacts. Firstly, a set of risk acceptance criteria are proposed. This is followed by a mathematically based procedure for calculation of the probability of critical ship meeting situations near the bridge, and the probability of ship collision accidents caused by human errors as well as technical errors. This first part of the paper leads to identification of the largest striking ship, “design vessels”, a given bridge pier must withstand without structural failure in order for the bridge connection to fulfil the risk acceptance criteria. The final part of the paper is devoted to an analysis of the needed impact capacity for the bridge pylons and piers exposed to ship bow impact loads from these “design vessels”. For a number of different ship types and different tonnage merchant vessels, load – displacement relations for ship bow collisions against rigid walls are derived. Based on these comprehensive numerical results, a new empirical relation is derived which is suited for design against bow collisions. This expression for maximum bow collision forces is compared with a previously published expression for ice-strengthened ships and with existing standards for assessment of bow crushing forces. It is shown that there is need for an update of these existing standards. For design of piers and pylons against local impact pressure loads, a pressure - area relation for bulbous bow impacts is derived.
Marine Spatial Planning (MSP) requires the analysis of the spatial distribution of marine uses and environmental conditions. Such analyzes can be carried out with GIS, but standard GIS programs do not feature a toolbox that combines the most needed functionalities for such analyses. The SPACEA toolbox presented here was created to bundle and adapt existing functionalities in one toolbox. SPACEA consists of several script tools that have been designed to be user-friendly and applicable to different analyzes for MSP. This includes the processing of different input layers with regard to marine uses and environmental conditions. The main functionalities of SPACEA are exemplified in a fictional case study in the Baltic Sea, where the tools are applied to find potentially suitable areas for mussel farming. The tools feature a user-friendly interface and more experienced users may also use the provided sample codes to run it from the python window or as a stand-alone script. As such, the tools can be applied by users with different levels of GIS knowledge and experience.