The term ‘innovation ecosystem’ has become popular among stakeholders involved in innovation. The core idea is that innovation does not thrive through isolated actions of individual companies, but rather depends on a broad array of interrelated actors, institutions and policies. In this paper, we apply the concept of innovation ecosystems to ports by first providing a theoretical overview of its components and then comparing the efforts to build such an ecosystem in the port cities of Rotterdam and Valencia. Our main findings are as follows. First, the importance of innovation for the ability of ports to continue to create ‘value for society’ is widely acknowledged. Second, research and development (R&D) activities in both Rotterdam and Valencia are relatively limited and the dominant innovation challenge is the early application of new technologies developed outside the ports industry. Third, a ‘systemic approach’ is required to understand the innovation ecosystem in ports, given the strong interrelations among companies in the port and the need for broad coalitions to implement new technologies. Fourth and fifth, human capital formation and research cooperation, respectively, play a central role in improving the port innovation ecosystem. Finally, the ecosystem in Rotterdam is ‘distributed and connected’ while Valencia is more centralised.
Mooring failures significantly threaten the stability of Floating Offshore Wind Turbines (FOWT) under extreme environmental conditions. This study presents an innovative shared damping mooring system incorporating Seaflex dampers to improve structural stability and operational reliability. Dynamic simulations under 1-year and 50-year return period sea states demonstrate the system’s effectiveness. Under Ultimate Limit State (ULS) conditions, the system reduces surge displacement by 59%, pitch angle by 47%, and mooring line tension by 72%. Under Accidental Limit State (ALS) conditions, it mitigates load spikes, reduces drift displacement by 60%, and improves safety factors by 50%. The comparison shows chain and wire rope configurations have better load reduction performance in the shared damping scheme. Lightweight and adaptable, the Seaflex dampers enhance broad-spectrum damping without affecting platform buoyancy. This study provides a robust solution for improving FOWT safety and durability in harsh marine environments, enabling large-scale offshore wind energy development.
The International Ballast Water Management (BWM) Convention entered into force in September 2017. In the convention, the International Maritime Organization (IMO) required two options: ballast water exchange (BWE) standard D-1, and ballast water performance standard D-2 which required ballast water treatment systems (BWTSs). We explored the impact of policy on the utilization of BWTSs by examining IMO Type Approval records and country-level databases in the United States and Australia. In December 2018, 65 BWTSs had IMO Type Approval and 13 had US Coast Guard approval. The majority of vessels with BWTSs had either electrolytic or UV treatment systems (Australia, 84%; USA, 89%). From 2016 to 2017, both countries experienced an increase in the percentage of vessels with BWTS, vessels utilizing BWTS, and total ballast discharge treated with BWTS. Based on this analysis, shipowners appear to primarily rely on two treatment technologies in Australia and the United States to meet compliance.
The international Maritime Organization (IMO) Weather Criterion has proven to be the governing stability criteria regarding minimum metacentric height for e.g., small ferries and large passenger ships. The formulation of the Weather Criterion is based on some empirical relations derived many years ago for vessels not necessarily representative for current new buildings with large superstructures. Thus, it seems reasonable to investigate the possibility of capsizing in beam sea under the joint action of waves and wind using direct time domain simulations. This has already been done in several studies. Here, it is combined with the first order reliability method (FORM) to define possible combined critical wave and wind scenarios leading to capsize and corresponding probability of capsize. The FORM results for a fictitious vessel are compared with Monte Carlo simulations, and good agreement is found at a much lesser computational effort. Finally, the results for an existing small ferry will be discussed in the light of the current weather criterion.
Most of the operational problems in container terminals are strongly interconnected. In this paper, we study the integrated Berth Allocation and Quay Crane Assignment Problem in seaport container terminals. We will extend the current state-of-the-art by proposing novel set partitioning models. To improve the performance of the set partitioning formulations, a number of variable reduction techniques are proposed. Furthermore, we analyze the effects of different discretization schemes and the impact of using a time-variant/invariant quay crane allocation policy. Computational experiments show that the proposed models significantly improve the benchmark solutions of the current state-of-art optimal approaches.
In global liner shipping networks, a large share of transported cargo is transshipped at least once between container vessels, and the total transportation time of these containers depends on how well the corresponding services are synchronized. We propose a problem formulation that integrates service scheduling into the liner shipping network design problem. Furthermore, the model incorporates many industry-relevant modeling aspects: it allows for leg-based sailing speed optimization, it is not limited to simple or butterfly-type services, and it accounts for service-level requirements such as cargo transit time limits. The classic liner shipping network design problem is already a hard problem, and to solve the extended version, we propose a column-generation matheuristic that uses advanced linear programming techniques. The proposed method solves LINER-LIB instances of up to 114 ports and, if applied to the classic liner shipping network design problem, finds new best solutions to all instances, outperforming existing methods reported in the literature. Additionally, we analyze the relevance of scheduling for liner shipping network design. The results indicate that neglecting scheduling and approximating transshipments instead may result in the design of liner shipping networks that underestimate cargo transit times and their implications.
Antifouling properties of unmodified kraft lignin for potential use in marine coatings were investigated. The study was based on preliminary findings that pointed toward lignin’s efficacy against seawater organisms during laboratory tests. Coatings were formulated that contained lignin as a filler and had a pigment volume concentration above the critical pigment volume concentration. This ensured direct interaction between lignin and seawater organisms, as the lignin particles remained incompletely wetted by the binder. Moreover, all formulations were waterborne to mitigate the release of volatile organic compounds. Despite the initial promise, the antifouling performance of the formulated lignin coatings during field experiments at the CoaST Maritime Test Center was limited, and the anticipated mechanism must be reconsidered. Additionally, it was found that high lignin concentrations, while facilitating organism interaction, compromised the coating's mechanical properties. Nevertheless, the waterborne coating formulation introduced here might provide a foundation for other researchers to further investigate lignin’s potential as a bio-based pigment or a filler in coatings.
The objective of this article is to provide a review of literature dealing with empty container repositioning. This review is interlinked with a qualitative data analysis based on semi-structured interviews with representatives of ocean carriers, which are key actors determining empty container repositioning. Empirical evidence obtained from fieldwork in the Czech Republic, albeit limited, is used to illustrate empty repositioning management by ocean carriers in the Central and Eastern Europe (CEE) landlocked hinterlands, which have been neglected in research with a specific geographic scope. By addressing the research questions and conducting the analysis, the authors determine whether empty container repositioning is a problem only concerning equipment allocation by an ocean carrier or requires a collaborative resolution involving various parties engaged in container movements in landlocked hinterlands. This article confirms that most existing literature dealing with empty container repositioning ignores the actual dynamics of landlocked hinterlands as well as business practitioners' perspective. The authors' analysis of the empirical research complements and challenges the reviewed research studies. Based on the analysis, ocean carriers seem to be unwilling to revise their actual container management strategies focused on maritime repositioning, disregarding the potential and importance of intermodal repositioning approaches based on market collaboration. Regarding further research directions, the authors suggest the research replicability and its extension.
This article aims to present the most relevant practices of offshore oil contracting at an international level, in order to better understand the legal dynamics of the sector. The problem investigated deals with the terms of the legal relationship between the State and national and foreign public companies, as well as the relationship between States, with a view to the exploitation of shared offshore oil resources. This problem is current, taking into account both the fact that oil is a scarce resource, as well as the fact that its offshore exploration is particularly complex and risky. This article presents, in a non-exhaustive way, some examples of practices that illustrate contractual trends that have already crystallized. The approach to its content is made from an international law perspective, focused on the transnational challenges posed to States and operators. It is concluded that the sector is characterized by a huge variety of practices, which reveals an ability of operators to adapt to the characteristics of the concrete challenges of an offshore exploration project. It also shows the political and economic particularities of the States involved in the process.
Container shipping is generally considered a global business. This truth may not hold from a single-company perspective. The companies’ physical operation networks show that container carriers operate differently and follow different paths in their internationalisation development. Additionally, the degree of internationalisation, measured on the basis of sea-oriented operations, differs from that measured according to land-oriented front-end marketing and sales activities. The purpose of this study is to further examine the internationalisation patterns of shipping lines. An examination of the front-end activities and the structures of leading container-shipping companies is conducted. The sales office networks of the sector’s 20 largest companies worldwide (by twenty-foot equivalent unit capacity) are analysed as key indicators. The numbers of sales offices are measured by analysing the websites of the sample (20 companies), as well as annual reports and other publicly available data sources. The findings show that not all shipping companies are international, by virtue of the industry. While it is difficult to observe differences in the overall patterns of the sales networks at a macro level, some companies differ in their activities. The data set also shows that market share and total capacity are not necessarily good indicators of a carrier’s worldwide presence. This research is based on secondary data. Other important transactional and market-oriented considerations should be examined before drawing conclusions about the internationalisation of container-shipping companies and of the industry. This paper contributes to the relevant existing research, particularly by adding its view on the demand-oriented criteria as suggested by Dunning and Lundan (2008).