Collaborative spatial decision support tools can contribute with setups for including stakeholders into marine spatial planning (MSP) processes with the purpose of increasing trust in planning outcomes, facilitate knowledge co-creation and shared planning goals, and provide transparent, scientific, inclusive, and technical foundations for planning. A new collaborative spatial decision support setup based on the combination of functionalities from two spatial decision support tools called SEANERGY and Baltic Explorer was designed for and tested in a workshop in 2020 targeted local authorities, NGOs, and citizens in Denmark with an interest in MSP. While the setup needs further testing among a wider span of stakeholders to support a pluralistic approach, the findings illustrate promising potentials from ranking conflicts and synergies in collaborative settings to make marine activity interests spatially visible in MSP and gain an overview of opportunities for sea use multi-functionality in context-based, interactive, goal-oriented stakeholder processes. The use of a visual platform such as Baltic Explorer to systematically explore locations of marine uses was positively evaluated to facilitate the workshop conflict-synergy discussions. Challenges relate to how to deal with disagreements on conflict-synergy scores and the subjectivity of opinions, but the demonstrated flexible, quick, transparent way to test the sensitivity of spatial patterns to differences in input conflict-synergy scores is found to provide a promising setup for including stakeholder opinions through collaborative settings, a setup adjustable to supplementary large-scale, individual, more representative surveys as well.
Wave excitation tests on a fixed sphere with the center at the still water level were carried out with three different physical wave basin setups. The tests were completed as a continued effort of the working group OES Wave Energy Converters Modeling Verification and Validation to increase confidence in numerical models of wave energy converters by generation of accurate benchmarks datasets for numerical model validation. An idealized test case with wave excitation of a fixed sphere to be used with the benchmarks was formulated. The three investigated physical wave basin setups included: 1) a six degree-of-freedom load cell mounted to the top of the sphere, 2) a bending beam force transducer mounted to the top of the sphere, and 3) a system of six pretensioned wires mounted to the top and bottom of the sphere with force transducers attached to each wire. The aim of the present paper is to identify the best representation of the idealized test case. To this end, the three experimental setups are inter-compared in terms of dynamic properties, sensitivity, and disturbances of the water phase from the presence of measurement equipment. Low inter-experiment variability was disclosed, ie, 5-8% depending on wave-nonlinearity, indicating accurate representations of the idealized test case across all setups. Setup 3 was found to be the more accurate representation and further work with this setup to release a public benchmark dataset was planned.
With increasing demand for renewable energy resources, the development of alternative concepts is still ongoing. The wave energy sector is still in vast development on the way to contribute to the energy production world wide. The present study presents the development of the Exowave wave energy converter made so far. A numerical model has been established supported by wave flume tests performed at Aalborg University during the first phase of the development. Furthermore, a successful open sea demonstration has been performed on 7 meters of water at Blue Accelerator, Belgium, from which the concept has been proven. As part of the ongoing research, verification of the numerical model will be made through experimental testing in the wave tank of Aalborg University, and an open sea demonstration at 14 meters of water depth will be executed off the coast of Hanstholm, Denmark.
Two different media platforms played a key role in keeping Tema Port in Ghana afloat during the period immediately leading up to and during the three-week COVID-19 pandemic-related lockdown in late March–April of 2020. The one media platform, Eye on Port, is a weekly broadcast television show by the port’s authorities, which caters primarily to external commercial stakeholders of the port. The other platform is a closed WhatsApp forum used by stakeholders working at the operational level of the port. Both platforms served specific needs among their users, who had been restricted in their mobility but had to keep the port operational. Combining ‘scalable sociality’ with the concept of polymedia, we identify how the two media functioned to meet the different informational and conversational needs of their respective users. We argue that either medium alone could not fulfil the communicative needs necessary to keep the port operational during the early stage of the COVID-19 pandemic.
The impact of the growing cruise ship industry on air quality levels was investigated at the port of Copenhagen, Denmark. In 2018, 345 cruise ships visited Copenhagen, emitting 291 tons of NOx near the city centre. A spatiotemporal cruise ship emission inventory was developed for 2018 based on port list information, engine data, main and auxiliary engine power functions, and NOx emission factors, and was implemented in the OML-Multi atmospheric dispersion model. Evident plume effects from the cruise ships, which were traced by introducing the concept of likely concentration contribution, were obtained in the modelled and measured concentrations at Langelinie Quay, which is the busiest cruise ship terminal in Copenhagen port. Hourly peak values of NOx well above 200 μg m−3 were obtained at the top of a residential building at Langelinie Quay. The emissions from cruise ships were increasing the annual concentration of NO2 in the port area by up to 31% at ground level, and 86% 50 m above the ground in comparison to the urban background level. No exceedance of the European annual limit value of NO2 was obtained. The short-term impact of cruise ships was more pronounced with local exceedances of the hourly European limit value for NO2. Increasing cruise ship activity in Copenhagen port leads to air quality deterioration on short time scales with implications for human health.
Purpose— The article presents a commentary on the case Alleged Violations of Sovereign Rights and Maritime Spaces in the Caribbean Sea (Nicaragua v. Colombia), aiming to deliver a comprehensive summary of the case and general commentary on the most relevant claims and the procedural history. Design, Methodology, Approach— The article comments on the case following a procedural structure, explaining the principal factual and jurisdictional issues, the application presented by Nicaragua, the preliminary exceptions, and the counterclaims presented by Colombia during the jurisdictional phase of the case leading to the judgment on jurisdiction in 2016, and the decision on the merits rendered by the Court in 2022. Findings— The commentary highlights the difficulties raised before the ICJ when entertaining the admissibility of counterclaims, and studies the factual pattern that led to Nicaragua’s application as a manifestation of a conduct of resistance to international courts and tribunals. Practical Implications— The article may provide readers with in-depth knowledge of recent litigation that is relevant to the law of the sea but also the authority of the ICJ and the effectiveness of its judgments. Originality, Value— The article is one of the few case commentaries on the procedural history and legal claims before the ICJ in this very recent case that was decided by the Court in 2022.
The interpretation of “disputes concerning military activities” under Article 298(1)(b) of the United Nations Convention on the Law of the Sea (UNCLOS) rests on a sensitive balance between the protection of strategic interests of States and the need for peaceful settlement of international disputes. There, an essential issue arises how an adjudicative body acting under Part XV UNCLOS should assess the nature of conducts of State for the purposes of Article 298(1)(b). This issue was vividly raised in the dispute between Ukraine and the Russian Federation with regard to the detention of Ukrainian naval vessels and servicemen. In this regard, both the International Tribunal for the Law of the Sea (ITLOS) and the arbitral tribunal set out in accordance with Annex VII UNCLOS wrestled with this issue. This article examines the manner of the interpretation of the concept of the military activities for the purposes of Article 298(1)(b) by comparing the approaches taken by ITLOS and the Annex VII arbitral tribunal.
Ship grounding experiments are important benchmarks used to validate numerical analysis, analytical and empirical formulation. They are key to the understanding of damage mechanism. A set of small-scale ship model grounding tests over a sharp rock are conducted in a water tank considering the influence of surrounding water. Two damage modes are observed in the grounding tests, Mode I for discontinuous fracture/tear and Mode II for continuous fracture/tear. The horizontal grounding resistance forces, damage extents of ship bottom plates, and ship motions are recorded and discussed in detail. Moreover, the energy dissipation process of ship model during grounding process is analyzed based on the test results. The influence of the initial velocity, the initial relative height between the upper surface of the horizontal ship bottom plate and the rock tip, and the rock eccentricity on the ship motion response and structural damage are studied.
Optimisation of energy efficiency and operational performance as well as assessment of safety levels and emissions of marine operations require detailed information about the acting wave system. It is possible-with an analogy to classical wave buoys-to estimate the directional wave spectrum by processing sensor measurements of wave-induced responses (e.g., motions and structural responses) from a ship. Compared to other sources of wave data (e.g., buoys, satellites, third-generation wave models), estimation concepts using the ship itself as a buoy provide the wave spectrum at the exact spatio-temporal point, potentially increasing accuracy and with minimal associated cost. This paper gives an overview of the technology, discusses associated uncertainties, and highlights new developments made for estimating waves via measured ship responses.
Ship-to-ship (STS) bunkering of liquid fuel, e.g., LNG, has emerged as a more practical way to ensure high bunkering volumes and good access without regional restrictions and upgrading of existing infrastructures at the port. Wave resonance in the narrow gap between side-by-side receiving vessel and bunkering vessel happens when the wave frequency is close to the natural frequency of the gap flow. Large wave elevation in the gap and hydrodynamic forces on the
ships are expected, thus reducing the time window of the bunkering operation and even risking the safety of the crew. It is well known that the wave frequency and amplitude can be affected by the presence of current. Correspondingly, the waves and loads on marine structures will be somewhat different from the scenario without current, which will have significant influence on the bunkering operation. However, few previous studies have reported in the literature for wave resonance considering current effect. In the present work, the finite-amplitude fluid resonance inside the gap between two ship cross-sections in side-by-side configuration is studied under combined waves and currents. Both a uniform current and a shear current with constant vorticity are considered. A fully nonlinear numerical wave tank is established based on the commercial CFD package STAR-CCM+. The unsteady Reynolds averaged Navier-Stokes turbulence model is applied to consider viscous dissipation. The volume of fluid method is applied to capture the free surface, and the flow field analytically obtained from the stream function method is specified in the forcing zones at upstream and downstream boundaries, respectively, by the user-defined wave elevation and velocity. The influence of following current on the wave amplitude in the gap and hydrodynamic load on the cross-sections is investigated by comparison with the cases without current. The relation between the wave or force amplitude and the vorticity of the shear is further analysed. The present study may provide useful results about gap resonance and hydrodynamic loads on two approaching marine structures during the bunkering operation in wave-current environment.