Maritime transport carries around 80% of the world’s trade. It is key to the economic development of many countries, it is a source of income in many countries, and it is considered as a safe and environment friendly mode of transport. Given its undisputed importance, a question is what does the future hold for maritime transport. This chapter is an attempt to answer this question by mainly addressing the drive to decarbonize shipping, along with related challenges as regards alternative low carbon or zero carbon marine fuels. The important role of maritime policy making as a main driver for change is also discussed. Specifically, if maritime transport is to drastically change so as to meet carbon emissions reduction targets, the chapter argues, among other things, that a substantial bunker levy would be the best (or maybe the only) way to induce technological changes in the long run and logistical measures (such as slow steaming) in the short run. In the
long run this would lead to changes in the global fleet towards vessels and technologies that are more energy efficient, more economically viable and less dependent on fossil fuels than those today. In that sense, it would have the potential to drastically alter the face of maritime transport in the future. However, as things stand, and mainly for political reasons, the chapter also argues that the adoption of such a measure is considered as rather unlikely.
The estimation of the thrust deduction fraction is generally conducted in ideal weather conditions. However, the presence of waves considerably alters the magnitude of this propulsive coefficient. The increased load of the propeller could be the main cause for the variation of the thrust deduction fraction in realistic operating conditions. In this work, load-varying self-propulsion model-scale numerical simulations in calm water conditions for the same ship speed are performed to investigate the influence of the propeller loading on the thrust deduction fraction. The single screw model-scale KVLCC2 tanker is selected as the case study. The results reveal a non-linear inverse correlation between the thrust deduction fraction and the propeller loading. A comparison with model-testing conducted on the KVLCC2 tanker in regular head waves suggests that the propeller loading is the main factor influencing the magnitude of the thrust deduction fraction in waves for the considered case vessel.
We consider a strategic infrastructure and tanker fleet sizing problem in the liquefied natural gas business. The goal is to minimize long-term on-shore infrastructure and tanker investment cost combined with interrelated expected cost for operating the tanker fleet. A non-linear arc-based model and an exact solution method based on a set-partitioning formulation are developed. The latter approach allows very fast solution times. Computational results for a case study with a liner shipping company are presented, including an extensive sensitivity analysis to account for limited predictability of key parameter values, to analyze the solutions’ robustness and to derive basic decision rules.
A major part of the world fleet of more than 47,000 merchant ships operates under conditions that hamper energy efficiency and efforts to cut CO2 emissions. Valid and reliable data sets on ships' energy consumption are often missing in shipping markets and within shipping organizations, leading to the non-implementation of cost-effective energy efficiency measures. Policy makers are aiming to remedy this, e.g., through the EU Monitoring, Verification and Reporting scheme. In this paper, current practices for energy consumption monitoring in ship operations are explored based on interviews with 55 professionals in 34 shipping organizations in Denmark. Best practices, which require several years to implement, are identified, as are common challenges in implementing such practices—related to data collection, incentives for data misreporting, data analysis problems, as well as feedback and communication problems between ship and shore. This study shows how the logic of good energy consumption monitoring practices conflict with common business practices in shipping companies – e.g., through short-term vessel charters and temporary ship organizations – which in turn can explain the slow adoption of energy efficiency measures in the industry. This study demonstrates a role for policy makers or other third parties in mandating or standardizing good energy consumption monitoring practices beyond the present requirements.
Hydrogen energy is a promising solution for prompting low-carbon port development. This study introduces two hydrogen utilization strategies: hydrogen consumption-driven strategy (HCDS) and hydrogen storage-driven strategy (HSDS). Using data from a real port and a life-cycle assessment approach, a case study is conducted to compare their economic and ecological performances. The results show that HCDS enhances economic benefits, with an annualized cost of 66.1 million CNY, which is 11% lower than HSDS. Additionally, HCDS is sensitive to electricity prices and grid carbon emission factor. In contrast, HSDS offers superior ecological benefits, with an annualized carbon footprint of 31,300 tons of CO₂, which is 12% lower than HCDS, and is mainly sensitive to purchase prices and emission factors of electricity and hydrogen. This study provides critical insights into the trade-offs between economic and ecological performance under different hydrogen utilization strategies, offering practical guidance for implementing hydrogen energy system applications in ports.
Offshore grids can play key roles in the transition of energy systems toward sustainability. Although they require extensive infrastructure investments, they allow for the exploitation of additional resources and may be important in providing for part of the increasing electricity demands driven by sector coupling. This paper quantifies the socioeconomic value of offshore grids and identifies their major drivers, performing energy system optimization in a model application of the northern–central European energy system and the North Sea offshore grid towards 2050. The increasing wake loss with the sizes of hub-connected wind farms is integrated in the modeling. We find that without sector coupling no offshore grid may develop, and that the higher the level of sector coupling, the higher the value of offshore grids. Therefore, it can be strongly stated that offshore grid infrastructure development should not be discussed as a separate political topic, but seen in connection to sector coupling.
As maritime technology advances, multi-energy ship microgrids (MESMs) are widely used in large cruise tourism. In this context, studying cost-effective and highly reliable energy system planning methods for MESMs in their entire lifespan becomes paramount. Therefore, this paper proposes a joint planning method for a MESM during its lifetime. Firstly, a long timescale coordinated planning and operation scheme is formulated with the aim of maximizing the Net Present Value (NPV) value, thereby reducing both project investment and energy supply cost. In addition, this paper introduces novel operation models that incorporate customer thermal comfort levels, considering thermal inertia, and ship navigation, accounting for the effects of waves and wind. These models enhance the flexibility and practicality of the planning process. Finally, to ensure the safe operation of vessels and alleviate the negative effects of uncertain wind and waves during ship navigation, a robust optimization (RO) approach is employed. A case study demonstrates the effectiveness of the proposed method, with several comparison analyzes further highlighting its advantages.
The cold ironing system is gaining interest as a promising approach to reduce emissions from ship transportation at ports, enabling further reductions with clean energy sources coordination. While cold ironing has predominantly been applied to long-staying vessels like cruise ships and containers, feasibility studies for short-berthing ships such as ferries are limited. However, the growing demand for short-distance logistics and passenger transfers highlights the need to tackle emissions issues from ferry transportation. Incorporating electrification technology together with integrated energy management systems can significantly reduce emissions from ferry operations. Accordingly, this paper proposes a cooperative cold ironing system integrated with clean energy sources for ferry terminals. A two-stage energy management strategy combining sizing and scheduling optimization is employed to reduce the port's emissions while minimizing system and operational costs. The proposed system configuration, determined through the sizing method, yields the lowest net present cost of $9.04 M. The applied energy management strategy managed to reduce operational costs by up to 63.402 %, while significantly decreasing emissions from both shipside and shoreside operations. From the shipside, emissions reductions of 38.44 % for CO2, 97.7 % for NOX, 96.69 % for SO2, and 92.1 % for PM were achieved. From the shoreside, the approach led to a 28 % reduction across all emission types. Thus, implementing cold ironing powered by clean energy sources is a viable solution for reducing emissions generated by ferry operations. The proposed energy management approach enables emissions reduction and delivering cost-effectiveness at ferry terminals.
The design of wave energy converters should rely on numerical models that are able to estimate accurately the dynamics and loads in extreme wave conditions. A high-fidelity CFD model of a 1:30 scale point-absorber is developed and validated on experimental data. This work constitutes beyond the state-of-the-art validation study as the system is subjected to 50-year return period waves. Additionally, a new methodology that addresses the well-known challenge in CFD codes of mesh deformation is successfully applied and validated. The CFD model is evaluated in different conditions: wave-only, free decay, and wave–structure interaction. The results show that the extreme waves and the experimental setup of the wave energy converter are simulated within an accuracy of 2%. The developed high-fidelity model is able to capture the motion of the system and the force in the mooring line under extreme waves with satisfactory accuracy. The deviation between the numerical and corresponding experimental RAOs is lower than 7% for waves with smaller steepness. In higher waves, the deviation increases up to 10% due to the inevitable wave reflections and complex dynamics. The pitch motion presents a larger deviation, however, the pitch is of secondary importance for a point-absorber wave energy converter.
This work presents the verification and validation of the freely available simulation tool MoodyMarine, developed to help meet some of the demands for early stage development of MRE devices. MoodyMarine extends the previously released mooring module MoodyCore (Discontinuous Galerkin Finite Elements) with linear radiation-diffraction bodies, integrated pre-processing workflows and a graphical user interface. It is a C++ implementation of finite element mooring dynamics and Cummins equations for floating bodies with weak nonlinear corrections. A newly developed nonlinear Froude-Krylov implementation is verified in the paper, and MoodyMarine is compared to CFD simulations for two complex structures: a slack-moored floating offshore wind turbine and a self-reacting point-absorber with hybrid mooring.