Monopiles are often the preferred foundation concept for an offshore wind turbine. The interaction between extreme waves and the large diameter monopile will in some cases result in a vertical jet of water uprush on the monopile (i.e., wave run-up) which subsequently may lead to large slamming loads on monopile appurtenances like the external working platform.
Extreme wave run-up interaction with an external working platform is often an area of concern during the design phase of an offshore wind project as an overly conservative assessment of the run-up loads may lead to unneeded costs in material and an increased project carbon footprint. An insufficient assessment of the run-up loads may lead to structural failure of the appurtenances and subsequent costly maintenance and repair works, further exacerbated by possibly difficult access to the damaged platform.
The practical process in the assessment of wave run-up on monopiles and associated loads on appurtenances can be a challenge to the designer due to lack of guidance on this topic in governing standards. The designer may then have to rely on several sources of available literature and must assess and include the effect of associated uncertainties like: Adjustment to site specific environmental conditions, unclear or unconcise terminology in the literature, lack of model test results representing the actual geometry and limited knowledge of spatial and temporal run-up load distribution on the appurtenances.
The aim of the present paper is to describe a complete methodology for assessment of wave run-up on monopiles and associated loads on appurtenances. The methodology, which will serve as a practical guide, is based on a collection of existing methods with new analysis to consider the pressure distribution on modern asymmetric grated platforms. This was based on experiences gained and challenges encountered during a detail design project of a monopile foundation for an offshore wind turbine in extreme environmental conditions. The sensitivity of the run-up assessment related to the design input (water depth, wave height and period, associated water level and current conditions) is discussed by considering a matrix with various environmental input combinations representing extreme environmental conditions.
Power-to-X plants can generate renewable power and convert it into hydrogen or more advanced fuels for hard-to-abate sectors like the maritime industry. Using the Bornholm Energy Island in Denmark as a study case, this study investigates the off-grid production e-bio-fuel as marine fuels. It proposes a production pathway and an analysis method of the oil with a comparison with e-methanol. Production costs, optimal operations and system sizing are derived using an open-source techno-economic linear programming model. The renewable power source considered is a combination of solar photovoltaic and off-shore wind power. Both AEC and SOEC electrolyzer technologies are assessed for hydrogen production. The bio-fuel is produced by slow pyrolysis of straw pellet followed by an upgrading process: hydrodeoxygenation combined with decarboxylation. Due to its novelty, the techno-economic parameters of the upgraded pyrolyzed oil are derived experimentally. Experimental results highlight that the upgrading reaction conditions of 350 °C for 2h with one step of 1h at 150 °C, under 200 bars could effectively provide a fuel with a sufficient quality to meet maritime fuel specifications. It requires a supply of 0.014 kg H2/kgbiomass. Modeling results shows that a small scale plant constrained by the local availability of and biomass producing 71.5 GWh of fuel per year (13.3 kton of methanol or 7.9 kton of bio-fuel), reaches production costs of 54.2 €2019/GJmethanol and 19.3 €2019/GJbio-fuel. In a large scale facility, ten times larger, the production costs are reduced to 44.7 €2019/GJmethanol and 18.9 €2019/GJbio-fuel (scaling effects for the methanol pathway). Results show that, when sustainable biomass is available in sufficient quantities, upgraded pyrolysis oil is the cheapest option and the less carbon intensive (especially thanks to the biochar co-product). The pyrolysis unit represents the main costs but co-products revenues such as district heat sale and biochar as a credit could decrease the costs by a factor three.
As ocean space increasingly is used for production purposes, such as for the production of food and feed, renewable energy and resource mining, competition for space becomes a concern. A spatial solution to this is to co-locate activities in a multi-use setting. Next to the direct (financial) costs and benefits of multi-use and the societal cost and benefits, there are other factors, in the realm of legal aspects, insurance, health and safety issues and the overall governance of multi-use, that determine whether multi-use can be implemented successfully. This includes transaction costs that arise when for example non-adequate regulation, governance and insurance schemes are in place. Based on the analysis of five case studies across Europe these combined/collective transaction costs of multi-use are analysed and suggestions how to reduce and/or overcome these transaction costs are presented.
Simulating the free decay motion and wave radiation from a heaving semi-submerged sphere poses significant computational challenges due to its three-dimensional complexity. By leveraging axisymmetry, we reduce the problem to a two-dimensional simulation, significantly decreasing computational demands while maintaining accuracy. In this paper, we exploit axisymmetry to perform a large ensemble of Computational Fluid Dynamics (CFDs) simulations, aiming to evaluate and maximize both accuracy and efficiency, using the Reynolds Averaged Navier–Stokes (RANS) solver interFOAM, in the opensource finite volume CFD software OpenFOAM. Validated against highly accurate experimental data, extensive parametric studies are conducted, previously limited by computational constraints, which facilitate the refinement of simulation setups. More than 50 iterations of the same heaving sphere simulation are performed, informing efficient trade-offs between computational cost and accuracy across various simulation parameters and mesh configurations. Ultimately, by employing axisymmetry, this research contributes to the development of more accurate and efficient numerical modeling in ocean engineering.
Offshore wind energy production has seen a significant expansion in recent years. With technologies rapidly improving and prices dropping, it is now one of the key instruments in the green energy transition. The implications of offshore wind farm expansion for maritime security and ocean governance have, so far, received sparse attention in the literature. This article offers one of the first thorough analyses of the security of offshore wind farms and related installations, such as underwater electricity cables, energy islands, and hydrogen plants. The technical vulnerabilities of wind farm systems is reviewed and threats from terrorism, crime and State hostilities, including physical and cyber risk scenarios, are discussed. The expansion of green offshore energy production must keep pace with the changing threat landscape that follows from it. Prospective solutions for the protection of wind farms systems, including surveillance, patrols and self-protection are discussed. The current repertoire of maritime security solutions is in many ways capable of dealing with the threats and risks effectively if adjusted accordingly. The analysis builds important new bridges between debates in energy security and maritime security, as well as the implications of climate change adaption and mitigation for security at sea.
Offshore wind energy production has seen a significant expansion in the past decade and has become one of the most important maritime activities. However, the implications of offshore wind farm expansion for maritime security have, so far, received sparse attention in the literature. In this article we conduct one of the first thorough analyses of the security of offshore wind farms and related installations, such as underwater electricity cables, energy islands, and hydrogen plants.
Physical wave basin tests with a focus on uncertainty estimation have been conducted on a fixed sphere subjected to wave loads at Aalborg University as part of the effort of the OES Wave Energy Converters Modeling Verification and Validation (formerly, OES Task 10) working group to increase credibility of numerical modeling of WECs.
The present note defines an idealized test case formulated to accurately represent the physical tests in a simple way. The test case consists of a fixed, rigid sphere half submerged in water subjected to regular waves of three different levels of linearity. The objective of the present note is to allow for numerical tests of the idealized test case.
Ice-breaking cones are commonly used in the design of marine structures in cold regions. This study investigates the effects of higher-harmonic wave loads and wave runup on a 5-MW offshore wind turbine with and without ice-breaking cones under extreme wave conditions on the Liaodong Peninsula in China. Two ice-breaking cones (upward-downward and inverted types) are considered. The numerical model adopts a two-phase flow by solving unsteady Reynolds-averaged Navier-Stokes (URANS) equations using the volume of fluid (VOF) method. A phase decomposition method through a ‘Stokes-like’ formulation was adopted to obtain the parameters for each harmonics. The presence of the conical part is seen to increase the second-harmonic wave loads by up to 40%, but it has only limited influence on the fourth and fifth harmonics. The upward-downward-type ice-breaking cone increases the third harmonic, while the inverted-type ice-breaking cone decreases the third harmonic. Due to the phase difference between the first-harmonic and higher harmonics, the largest wave runup occurs at 0°, and 135° is the location with the smallest wave runup. This is because at the 135-degree location, the linear component is positive but the other nonlinear components are negative. For the 0-degree location, all harmonics are positive. By contrast, the inverted type has little effect. The high harmonic wave runup of the minimum point is backwards compared with that of the monopile, and most nonlinear wave runups are different upstream of the monopile.
Hydrogen can be key in the energy system transition. We investigate the role of offshore hydrogen generation in a future integrated energy system. By performing energy system optimisation in a model application of the Northern-central European energy system and the North Sea offshore grid towards 2050, we find that offshore hydrogen generation may likely only play a limited role, and that offshore wind energy has higher value when sent to shore in the form of electricity. Forcing all hydrogen generation offshore would lead to increased energy system costs. Under the assumed scenario conditions, which result in deep decarbonisatiton of the energy system towards 2050, hydrogen generation – both onshore and offshore – follows solar PV generation patterns. Combined with hydrogen storage, this is the most cost-effective solution to satisfy future hydrogen demand. Overall, we find that the role of future offshore hydrogen generation should not simply be derived from minimising costs for the offshore sub-system, but by also considering the economic value that such generation would create for the whole integrated energy system. We find as a no-regret option to enable and promote the integration of offshore wind in onshore energy markets via electrical connections.
This work evaluates the hydrodynamic performance of an oscillating water column wave energy converter, with a focus on comparing conventional two-way energy capture to one-way energy capture where only the up- or down-stroke is used drive the turbine. Small-scale model test experiments are performed, and numerical calculations are made using weakly-nonlinear potential flow theory. The air turbine is represented experimentally by an orifice plate with a flow area equal to about 1% of the internal-chamber water-plane area. One-way energy capture by the experimental model is realized by incorporating a passive, low-inertia, non-return valve which vents the air inside the chamber on one half-cycle of the internal water-column oscillation. In the numerical calculations, there is little difference between the two venting configurations, due to the simplified weakly non-linear model. However, the experimental results show that up-stroke venting generally yields a higher power absorption than down-stroke venting and the two-way energy capture generally yields a higher power absorption compared to the one-way energy capture. The calculations agree well with the experiments for two-way absorption, but substantially over-predict the absorbed power in the one-way configuration. This is mainly attributed to the imperfect venting system in the physical model, but further tests and/or CFD calculations are needed to confirm this conclusion.