This paper describes a new high-order composite numerical model for simulating moored floating offshore bodies. We focus on a floating offshore wind turbine and its static equilibrium and free decay. The composite scheme models linear to weakly nonlinear motions in the time domain by solving the Cummins equations. Mooring forces are acquired from a discontinuous Galerkin finite element solver. Linear hydrodynamic coefficients are computed by solving a pseudo-impulsive radiation problem in three dimensions using a spectral element method. Numerical simulations of a moored model-scale floating offshore wind turbine were performed and compared with experimental measurements for validation, ultimately showing a fair agreement.
A 3D fully nonlinear potential flow (FNPF) model based on an Eulerian formulation is presented. The model is discretized using high-order prismatic – possibly curvi-linear – elements using a spectral element method (SEM) that has support for adaptive unstructured meshes. The paper presents details of the FNPF-SEM development and the model is illustrated to exhibit exponential convergence. The model is then applied to the case of focused waves impacting on a surface-piecing fixed FPSO-like structure. Good agreement was found between numerical and experimental wave elevations and pressures.
For the assessment of experimental measurements of focused wave groups impacting a surface-piecing fixed structure, we present a new Fully Nonlinear Potential Flow (FNPF) model for simulation of unsteady water waves. The FNPF model is discretized in three spatial dimensions (3D) using high-order prismatic - possibly curvilinear - elements using a spectral element method (SEM) that has support for adaptive unstructured meshes. This SEM-FNPF model is based on an Eulerian formulation and deviates from past works in that a direct discretization of the Laplace problem is used making it straightforward to handle accurately floating structural bodies of arbitrary shape. Our objectives are; i) present detail of a new SEM modelling developments and ii) to consider its application to address a wave-body interaction problem for nonlinear design waves and their interaction with a model-scale fixed Floating Production, Storage and Offloading vessel (FPSO). We first reproduce experimental measurements for focused design waves that represent a probably extreme wave event for a sea state represented by a wave spectrum and seek to reproduce these measurements in a numerical wave tank. The validated input signal based on measurements is then generated in a NWT setup that includes the FPSO and differences in the signal caused by nonlinear diffraction is reported.