The International Maritime Organization (IMO) is a specialized United Nations (UN) agency regulating maritime transport. One of the very hot topics currently on the IMO agenda is decarbonization. In that regard, the IMO decided in 2018 to achieve by 2050 a reduction of at least 50% in maritime green house gas (GHG) emissions vis-à-vis 2008 levels. The purpose of this paper is to discuss the possible role of Market Based Measures (MBMs) so as to achieve the above target. To that effect, a brief discussion of MBMs at the IMO and the EU is presented, and a possible way forward is proposed, focusing on a bunker levy.
Although the existing literature identifies a fuel levy imposed by means of a global agreement as the most efficient policy for carbon pricing in the maritime sector, scholars and policy makers have debated the possibility for regional measures to be introduced in case a global agreement cannot be achieved. This debate has highlighted several economic, legal, and political challenges that the implementation of an efficient and effective regional scheme would have to face. This article compares the relative performance of various regional measures for carbon pricing based on the following criteria: jurisdictional basis, data availability, environmental effectiveness and avoidance strategies, impact on competitiveness, differentiation for developing countries, and incentives for reaching a global agreement. The main finding is that, if carefully designed, a cargo-based measure that covers the emissions released throughout the whole voyage to the cargo destination presents various advantages compared with other regional carbon pricing schemes. These advantages have been largely ignored in the literature.
International shipping has been reported to account for 13% of global NOx emissions and 2.1% of global green house gas emissions. Recent restrictions of NOx emissions from marine vessels have led to the development of exhaust gas recirculation (EGR) for large two-stroke diesel engines. Meanwhile, the same engines have been downsized and derated to optimize fuel efficiency. The smaller engines reduce the possible vessel acceleration, and to counteract this, the engine controller must be improved to fully utilize the physical potential of the engine. A fuel index limiter based on air/fuel ratio was recently developed (Turbo, 2016), but as it does not account for EGR, accelerations lead to excessive exhaust smoke formation which could damage the engine when recirculated.
This paper presents two methods for extending a fuel index limiter function to EGR engines. The methods are validated through simulations with a mean-value engine model and on a vessel operating at sea. Validation tests compare combinations of the two index limiter methods, using either traditional PI control for the EGR loop or the recently developed fast adaptive feedforward EGR control (Nielsen et al., 2017a). The experiments show that the extended limiters reduce exhaust smoke formation during acceleration to a minimum, and that the suggested limiter, combined with adaptive feedforward EGR control, is able to maintain full engine acceleration capability. Sea tests with engine speed steps from 35 to 50 RPM, made peak exhaust opacity increase by only 5% points when using the proposed limiter, whereas it increased 70% points without the limiter.
As policy makers acknowledge the high degree of supply chain vulnerability and the impact of maritime emissions on coastal population health, there has been a consistent effort to strengthen maritime security and environmental regulations. In recent years, overdependence on deeper and wider multinational supply and production chains and lean-optimization has led to tightly integrated systems with little “slack” and high sensitivity to disruptions.
This study considers the impact of Emission Control Areas and establishes a link between environmental and network resilience performance for maritime supply chains using operational cost and SOx emissions cost metrics. The proposed methodological framework analyzes various abatement options, disruption intensities, fuel pricing instances and regulatory strategies. The methodology utilizes a minimum cost flow assignment and an arc velocity optimization model for vessel speed to establish the payoff for various network states. Additionally, an attacker defender game is set up to identify optimal regulatory strategies under various disruption scenarios. The results are complemented by a sensitivity analysis on SOx emissions pricing, to better equip policy makers to manage environmental and resilience legislation. The methodology and findings provide a comprehensive analytic approach to optimize maritime supply chain performance beyond minimisation of operational costs, to also minimize exposure to costly supply chain disruptions.
This paper examines if eco-rating schemes improve environmental outcomes in the context of the
international shipping industry. Shipping faces global environmental challenges and has recently
witnessed the introduction of several eco-rating schemes aiming to improve the environmental
performance of ships. Extending the private environmental governance literature into a mature
service industry with global operations, the paper shows that concerns about eco-rating schemes’
effectiveness also have relevance here. Shipping eco-rating schemes fall short of best practices for
design and governance, and this hampers improvement efforts. The study has policy implications for
the achievement of improved environmental outcomes in the shipping industry.
Ports are crucial hubs in the functioning of the global economy, and maritime transport is a major emitter of air pollutants. Ports have considerable potential for promoting environmental upgrading in maritime transport and along global value chains more generally, but so far have been only partially successful in doing so. We examine results, limitations and future potential of voluntary initiatives that have been carried out by selected European and North American port authorities, which are considered frontrunners in environmental management. Drawing from the insights of global value chain analysis and organizational theory, we find that low ‘tool implementation complexity’ and high ‘issue visibility’ concerning emissions are key facilitators of environmental upgrading. We suggest that ports can intervene in two main ways to improve the environmental performance of maritime transport beyond their organizational and physical boundaries: by lowering tool implementation complexity through stronger collaboration within global value chains; and by enhancing emission visibility through alliances with cargo-owners and regulators.
The 0.1% sulphur limit within Sulphur Emission Control Areas (SECA) has made compulsory the use of either pricier ultra-low sulphur fuel, or the installation of abatement technologies that require significant capital investments. Due to the unexpectedly low fuel prices, Ro-Ro operators have been able to cope with the new sulphur limits, but recent research has shown that if fuel prices increase some Ro-Ro services may face the risk of closure. This paper proposes three key performance indicators (KPIs) to enable the asssessment of the impact of SECAs on Ro-Ro shipping. The KPIs are used on a set of case studies for services of a leading European Ro-Ro operator, and allow benchmarking of a series of operational and policy measures that aim to reverse the negative impacts of SECAs. The operational measures consider speed reduction, new sailing frequency, fleet reconfiguration, as well as investments in abatement technologies. Policy measures include the options of either subsidizing shippers or ship operators, or alternatively introducing new taxes on landbased options. The KPIs can be useful to ship operators seeking to improve the resilience of their network, as well as to regulatory bodies designing new environmental policies and understanding any negative implications these may have on ship operators.
The literature on liner shipping includes many models on containership speed optimization, fleet deployment, fleet size and mix, network design and other problem variants and combinations. Many of these models, and in fact most models at the tactical planning level, assume a fixed revenue for the ship operator and as a result they typically minimize costs. This treatment does not capture a fundamental characteristic of shipping market behavior, that ships tend to speed up in periods of high freight rates and slow down in depressed market conditions. This paper develops a simple model for a fixed route scenario which, among other things, incorporates the influence of freight rates, along with that of fuel prices and cargo inventory costs into the overall decision process. The objective to be maximized is the line’s average daily profit. Departing from convention, the model is also able to consider flexible service frequencies, to be selected from a broader set than the standard assumption of one call per week. It is shown that this may lead to better solutions and that the cost of forcing a fixed frequency can be significant. Such cost is attributed either to additional fuel cost if the fleet is forced to sail faster to accommodate a frequency that is higher than the optimal one, or to lost income if the opposite is the case. The impact of the line’s decisions on CO2 emissions is also examined and illustrative runs of the model are made on three existing services.
A fuel levy is one of the market-based measures (MBMs) currently under consideration at the International Maritime Organization. MBMs have been proposed to improve the energy efficiency of the shipping sector and reduce its emissions. This paper analyses the economic and environmental implications of two types of levy on shipping bunker fuels by means of an analytical model built on the cobweb theorem. A unit-tax per ton of fuel and an ad-valorem tax, enforced as a percentage of fuel prices, are examined. In both cases, a speed and fuel-consumption reduction equivalent to an improvement in the energy efficiency of the sector would be expected as a result of the regulation enforcement. The speed reduction in the unit-tax case depends on fuel prices and the tax amount, whereas in the ad-valorem case it relies upon the enforced tax percentage.
Both schemes lead to industry profit decline, the extent of which depend on the structure of the levy and market conditions. Since there is concern that the costs resulting from the policy will be passed from shipping companies to their customers along the supply chain, the paper dwells on how the costs arising from the enforcement of the levy will be actually allocated between ship-owners and operators, and cargo-owners. In a market characterised by high freight rates and with no or limited excess capacity, a higher percentage of the total tax amount is transferred from ship-owners to shippers. In case of a recession the opposite happens.
The purpose of this paper is to investigate a multiple ship routing and speed optimization problem under time, cost and environmental objectives. A branch and price algorithm as well as a constraint programming model are developed that consider (a) fuel consumption as a function of payload, (b) fuel price as an explicit input, (c) freight rate as an input, and (d) in-transit cargo inventory costs. The alternative objective functions are minimum total trip duration, minimum total cost and minimum emissions. Computational experience with the algorithm is reported on a variety of scenarios.