We numerically simulate the hydrodynamic response of a floating offshore wind turbine (FOWT) using computational fluid dynamics. The FOWT under consideration is a slack-moored 1:70 scale model of the UMaine VolturnUS-S semi-submersible platform. The test cases under consideration are (i) static equilibrium load cases, (ii) free decay tests, and (iii) two focused wave cases of different wave steepness. The FOWT is modeled using a two-phase Navier-Stokes solver inside the OpenFOAM-v2006 framework. The catenary mooring is computed by dynamically solving the equations of motion for an elastic cable using the MoodyCore solver. The results are shown to be in good agreement with measurements.
We numerically simulate the hydrodynamic response of a floating offshore wind turbine (FOWT) using computational fluid dynamics. The FOWT under consideration is a slack-moored 1:70 scale model of the UMaine VolturnUS-S semi-submersible platform. The test cases under consideration are (i) static equilibrium load cases, (ii) free decay tests, and (iii) two focused wave cases of different wave steepness. The FOWT is modeled using a two-phase Navier-Stokes solver inside the OpenFOAM-v2006 framework. The catenary mooring is computed by dynamically solving the equations of motion for an elastic cable using the MoodyCore solver. The results are shown to be in good agreement with measurements.
A coupling between a dynamic mooring solver based on high-order finite element techniques (MooDy) and a radiation-diffraction based hydrodynamic solver (WEC-Sim) is presented. The high-order scheme gives fast convergence resulting in high-resolution simulations at a lower computational cost. The model is compared against a lumped mass mooring code (MoorDyn) that has an existing coupling to WEC-Sim. The two models are compared for a standard test case and the results are similar, giving confidence in the new WEC-Sim-MooDy coupling. Finally, the coupled model is validated using experimental data of a spread moored cylinder with good agreement.