Highly accurate and precise heave decay tests on a sphere with a diameter of 300 mm were completed in a meticulously designed test setup in the wave basin in the Ocean and Coastal Engineering Laboratory at Aalborg University, Denmark. The tests were dedicated to providing a rigorous benchmark dataset for numerical model validation. The sphere was ballasted to half submergence, thereby floating with the waterline at the equator when at rest in calm water. Heave decay tests were conducted, in which the sphere was held stationary and dropped from three drop heights: a small drop height, which can be considered a linear case, a moderately nonlinear case, and a highly nonlinear case with a drop height from a position where the whole sphere was initially above the water. The precision of the heave decay time series was calculated from random and systematic standard uncertainties. At a 95% confidence level, uncertainties were found to be very low — on average only about 0.3% of the respective drop heights. Physical parameters of the test setup and associated uncertainties were quantified. A test case was formulated that closely represents the physical tests, enabling the reader to do his/her own numerical tests. The paper includes a comparison of the physical test results to the results from several independent numerical models based on linear potential flow, fully nonlinear potential flow, and the Reynolds-averaged Navier–Stokes (RANS) equations. A high correlation between physical and numerical test results is shown. The physical test results are very suitable for numerical model validation and are public as a benchmark dataset.
A 3D fully nonlinear potential flow (FNPF) model based on an Eulerian formulation is presented. The model is discretized using high-order prismatic – possibly curvi-linear – elements using a spectral element method (SEM) that has support for adaptive unstructured meshes. The paper presents details of the FNPF-SEM development and the model is illustrated to exhibit exponential convergence. The model is then applied to the case of focused waves impacting on a surface-piecing fixed FPSO-like structure. Good agreement was found between numerical and experimental wave elevations and pressures.
We present recent progress on the development of a new fully nonlinear potential flow (FNPF) model for estimation of nonlinear wave-body interactions based on a stabilized unstructured spectral element method (SEM). We introduce new proof-of-concepts for forced nonlinear wave-body interaction in two spatial dimensions to establish the methodology in the SEM setting utilizing dynamically adapted unstructured meshes. The numerical method behind the proposed methodology is described in some detail and numerical experiments on the forced motion of (i) surface piercing and (ii) submerged bodies are presented.