The International Ballast Water Management (BWM) Convention entered into force in September 2017. In the convention, the International Maritime Organization (IMO) required two options: ballast water exchange (BWE) standard D-1, and ballast water performance standard D-2 which required ballast water treatment systems (BWTSs). We explored the impact of policy on the utilization of BWTSs by examining IMO Type Approval records and country-level databases in the United States and Australia. In December 2018, 65 BWTSs had IMO Type Approval and 13 had US Coast Guard approval. The majority of vessels with BWTSs had either electrolytic or UV treatment systems (Australia, 84%; USA, 89%). From 2016 to 2017, both countries experienced an increase in the percentage of vessels with BWTS, vessels utilizing BWTS, and total ballast discharge treated with BWTS. Based on this analysis, shipowners appear to primarily rely on two treatment technologies in Australia and the United States to meet compliance.
The offshore de-oiling process is a vital part of current oil recovery, as it separates the profitable oil from water and ensures that the discharged water contains as little of the polluting oil as possible. With the passage of time, there is an increase in the water fraction in reservoirs that adds to the strain put on these facilities, and thus larger quantities of oil are being discharged into the oceans, which has in many studies been linked to negative effects on marine life. In many cases, such installations are controlled using non-cooperative single objective controllers which are inefficient in handling fluctuating inflows or complicated operating conditions. This work introduces a model-based robust H ∞ control solution that handles the entire de-oiling system and improves the system’s robustness towards fluctuating flow thereby improving the oil recovery and reducing the environmental impacts of the discharge. The robust H ∞ control solution was compared to a benchmark Proportional-Integral-Derivative (PID) control solution and evaluated through simulation and experiments performed on a pilot plant. This study found that the robust H ∞ control solution greatly improved the performance of the de-oiling process.
Injection of water into wells is a common practice in offshore oil and gas installations, and here as in many other industries the water has to be deaerated before it is sent through miles of pipelines to reduce the risk of corrosion in those pipelines and other downstream equipment. It requires extremely low concentrations of dissolved oxygen for the corrosion of metals to begin, and removing the dissolved oxygen is currently done in large vacuum deaeration towers, a highly energy demanding process, along with additional injection of chemical oxygen scavengers. In many instances these processes are controlled in a feed-forward manner, where the operators rely on infrequent sampling and corresponding measurements to control the process. The possibilities for optimization in this field are thus numerous. The main challenges are online measurements of dissolved oxygen and their use in feedback control. This article gives a brief review of the state-of-the-art and investigates the potential of using dissolved oxygen as a reliable feedback parameter, taking inspiration from onshore waste water industries which have been dealing with dissolved oxygen feedback control since the 1970's.
This paper investigates the optimal control solution using MPC for a typical offshore topside de-oiling process. By considering the combination of the upstream three-phase gravity separator and the downstream de-oiling hydrocyclone set-up as one integrated plant, the plant-wide control problem is formulated and handled using MPC technology. The de-oiling dynamics of the hydrocyclone are estimated via system identification while the key dynamics of the considered gravity separator are modeled based on mass balance and experimental parameter estimation. The developed MPC solution is simulated and experimentally validated via a lab-scaled pilot plant. The comparison of performances of the MPC controlled system with those of a PID controlled system, which emulates the commonly deployed control solution in most current installations, shows the promising results in optimally balancing the gravity separator's (level) control and hydrocyclone's (PDR) control.
There has been a continued increase in the load on the current offshore oil and gas de-oiling systems that generally consist of three-phase gravity separators and de-oiling hydrocyclones. Current feedback control of the de-oiling systems is not done based on de-oiling efficiency, mainly due to lack of real-time monitoring of oil-in-water concentration, and instead relies on an indirect method using pressure drop ratio control. This study utilizes a direct method where a real-time fluorescence-based instrument was used to measure the transient efficiency of a hydrocyclone combined with an upstream gravity separator. Two control strategies, a conventional PID control structure and an H ∞ robust control structure, both using conventional feedback signals were implemented, and their efficiency was tested during severely fluctuating flow rates. The results show that the direct method can measure the system's efficiency in real time. It was found that the efficiency of the system can be misleading, as fluctuations in the feed flow affect the inlet concentration more than the outlet oil concentration, which can lead to a discharge of large oil quantities into the ocean.
The current and potential use of the seas and oceans is often called the 'Blue Economy'. Recently, the European Commission launched its Blue Growth Strategy on the opportunities for marine and maritime sustainable growth. The European Commission considers that Blue Growth is a long-term strategy in the marine and maritime sectors with great potential for innovation and economic growth. Holistic spatial planning systems supporting sustainable development have proven themselves in terrestrial planning and are also needed at sea. Due to this reason,
the BONUS BASMATI project is based on the ecosystem services approach to assist in assessing sustainable solutions corresponding to policy goals.
An increasing water to oil ration in the North Sea oil and gas production motivates for an optimization of the current deoiling facilities. Current facilities are operated on matured methodologies, which in most cases fulfill the government regulations. However, it has also observed that these solutions could be further improved. In order to more precisely monitor the deoiling operations, this study investigated the real-time monitoring of the deoiling efficiency of the hydrocyclone facilities which are commonly used in offshore oil and gas production. Fluorescence based monitors were applied to measure hydrocyclone inlet's and underflow's Oil-in-Water (OiW) concentrations in real-time. Image-based microscopy was used to analyze the oil droplet size distribution at inlet and underflow to investigate the droplets' influence on hydrocyclone's efficiency. Performance experiments were carried out to identify how pressure difference ratio (PDR) and the droplet's sizes affect the deoiling efficiency. The performance of the deoiling hydrocyclone was significantly influenced by the inlet flow rate, while less or marginally dependent on the PDR. The droplet size distribution experiment proved that large droplets have a high probability to be separated by the hydrocyclone. The findings suggest that the coupled separator tank and hydrocyclone system can be further improved upon by deploying coordinated control as the two systems are strongly interdependent.
Offshore de-oiling installations are facing an increasing challenge with regards to removing oil residuals from produced water prior to discharge into the ocean. The de-oiling of produced water is initially achieved in the primary separation processes using gravity-based multi-phase separators, which can effectively handle large amounts of oil-well fluids but may struggle with the efficient separation of small dispersed oil particles. Thereby hydrocyclone systems are commonly employed in the downstream Produced Water Treatment (PWT) process for further reducing the oil concentration in the produced water before it can be discharged into the ocean. The popularity of hydrocyclone technology in the offshore oil and gas industry is mainly due to its rugged design and low maintenance requirements. However, to operate and control this type of system in an efficient way is far less simple, and alternatively this task imposes a number of key control challenges. Specifically, there is much research to be performed in the direction of dynamic modeling and control of de-oiling hydrocyclone systems. The current solutions rely heavily on empirical trial-and-error approaches. This paper gives a brief review of current hydrocyclone control solutions and the remaining challenges and includes some of our recent work in this topic and ends with a motivation for future work.
This article is a feasibility study on using fluorescence-based oil-in-water (OiW) monitors for on-line dynamic efficiency measurement of a deoiling hydrocyclone. Dynamic measurements are crucial in the design and validation of dynamic models of the hydrocyclones, and to our knowledge, no dynamic OiW analysis of hydrocyclones has been carried out. Previous studies have extensively studied the steady state efficiency perspective of hydrocyclones, and have related them to different key parameters, such as the pressure drop ratio (PDR), inlet flow rate, and the flow spill. Through our study, we were able to measure the dynamics of the hydrocyclone's efficiency (ϵ) response to step changes in the inlet flow rate with high accuracy. This is a breakthrough in the modelling, control, and monitoring of hydrocyclones.
The shipping industry faces huge challenges with regard to improving its environmental performance. The current regulatory approach has not been successful. Public and private actors increasingly rely on partnerships. The literature on partnerships for sustainability has contributed to a better conceptualisation of the subject. However, less is known about the processes and the outcomes of the partnerships as well as interactions between partnerships. This paper aims to improve the understanding of how partnerships contribute to developing cleaner technologies in the Danish shipping industry. Two partnerships have been analysed: Partnership for Cleaner Shipping and the Green Ship of the Future. Participation, scope and division of roles among partners have influenced both partnerships. Furthermore, both partnerships have developed organisational forms that proved to overcome the tensions in traditional partnerships, between open and information-based networking on the one side and closed and development-oriented collaboration on the other side.