Mooring failures significantly threaten the stability of Floating Offshore Wind Turbines (FOWT) under extreme environmental conditions. This study presents an innovative shared damping mooring system incorporating Seaflex dampers to improve structural stability and operational reliability. Dynamic simulations under 1-year and 50-year return period sea states demonstrate the system’s effectiveness. Under Ultimate Limit State (ULS) conditions, the system reduces surge displacement by 59%, pitch angle by 47%, and mooring line tension by 72%. Under Accidental Limit State (ALS) conditions, it mitigates load spikes, reduces drift displacement by 60%, and improves safety factors by 50%. The comparison shows chain and wire rope configurations have better load reduction performance in the shared damping scheme. Lightweight and adaptable, the Seaflex dampers enhance broad-spectrum damping without affecting platform buoyancy. This study provides a robust solution for improving FOWT safety and durability in harsh marine environments, enabling large-scale offshore wind energy development.
This study proposes a novel tower damping system to enhance the structural performance of the NREL 5 MW semi-submersible wind turbine under operational and extreme load conditions. Environmental load data from the Norwegian MET center was analyzed to characterize the loading conditions for floating offshore wind turbines (FOWT). The probability density spectrum of sea state data was employed to identify operational load conditions. At the same time, the Inverse First-Order Reliability Method (IFORM) was used to derive the 50-year extreme sea state. Perform a fully coupled Aero-Hydro-Servo-Elastic simulation of the FOWT dynamic model with a damping system using OrcaFlex software. The results reveal that: Under operational sea states, the turbine tower-top displacement was reduced by 60–70%, and acceleration by 30–40%, enhancing tower-top stability. Under extreme loads, tower-top acceleration was reduced by 5–7%, and displacement by 6–8%. Cumulative damage assessments indicate a reduction in fatigue damage of up to 72%, with the effective fatigue life of the tower base extended by 136%. The proposed damping system significantly reduces vibration under fatigue and extreme load conditions.
The design of large diameter monopiles (8–10 m) at intermediate to deep waters is largely driven by the fatigue limit state and mainly due to wave loads. The scope of the present paper is to assess the mitigation of wave loads on a monopile by perforation of the shell. The perforation design consists of elliptical holes in the vicinity of the splash zone. Wave loads are estimated for both regular and irregular waves through physical model tests in a wave flume. The test matrix includes waves with Keulegan–Carpenter (KC) numbers in the range 0.25 to 10 and covers both fatigue and ultimate limit states. Load reductions in the order of 6%–20% are found for KC numbers above 1.5. Significantly higher load reductions are found for KC numbers less than 1.5 and thus the potential to reduce fatigue wave loads has been demonstrated.