An issue that ROVs experience during operations is disturbances from the tether, making navigation and control more difficult as real-time measurements are not currently available. This paper proposes the development of an innovative sensor that can measure tether forces in multiple degrees of freedom. These tether forces apply an external disturbance during operation, which is difficult to model and predict. The sensor provides real-time input on the effect the tether has on the ROV, which can be utilized in feed-forward in the control system in combination with a feedback loop. There are 2 proposed designs: a 4 DOF sensor design using a plastic bottle and a 6 DOF version utilizing an aluminum cross with hollowed sections. Both designs use strain gauges to measure and determine the direction and magnitude of the force from the tether.
The sensors are implemented to a modified BlueROV2 using ROS. Station-keeping tests in a harbor and test basin are done for the 4 DOF version to evaluate performance. The sensor shows potential, improving response in heave but worsening it in yaw. It removes and adds oscillations both in frequency and amplitude depending on the orientation of the waves relative to the sensor. Indicating alternative control strategies might be more suitable. The 6 DOF version is not tested on the BlueROV2. In future work, additional development is required to ensure the viability of the tether force sensor as a commercial product.
Physical wave basin tests with a focus on uncertainty estimation have been conducted on a sphere subjected to wave loads at Aalborg University as part of the effort of the OES Wave Energy Converters Modeling Verification and Validation (formerly, OES Task 10) working group to increase credibility of numerical modeling of WECs. The tests are referred to as the Kramer Sphere Cases, and the present note is dealing with wave excitation force tests on a fixed model. The present note is including details to facilitate CFD models which replicate the physical setup in detail.
Physical wave basin tests with a focus on uncertainty estimation have been conducted on a fixed sphere subjected to wave loads at Aalborg University as part of the effort of the OES Wave Energy Converters Modeling Verification and Validation (formerly, OES Task 10) working group to increase credibility of numerical modeling of WECs.
The present note defines an idealized test case formulated to accurately represent the physical tests in a simple way. The test case consists of a fixed, rigid sphere half submerged in water subjected to regular waves of three different levels of linearity. The objective of the present note is to allow for numerical tests of the idealized test case.
Floating Power Plant is, together with several partners, preparing to design, build and test a scaled version of the complete so-called P80 device. The scaled model is to be tested in AAU's wave basin, SSPA's facilities, followed by at least one external facility. The model will be tested in combinations of wave, wind and current conditions with a view to validating the numerical models and to further develop the understanding of the interactions within the device. The purpose of this document is to gather information that is relevant to designing and building the physically scaled model, and to designing and executing the test campaign.