In the current transition of power industry from conventional sources to renewable energy sources, wind power generation is becoming one of the key sources of electrical energy. Although the development of wind power plants (WPPs) has made a significant contribution to addressing the demand for clean and cheap energy, the integration of large-scale WPPs introduces a series of technical challenges to power system operations. These challenges involved control, protection, and adherence to specified power quality standards. Particularly, power quality plays a vital role in utility systems and industries having direct technical and economic impact on both power consumers and suppliers. To tackle such issues, various grid codes have been initiated by regulation authorities. Moreover, different ancillary devices and control approaches have been adopted to comply with the established grid code. This article aims to review the state-of-the-art research and progress, while considering the main challenges related to dynamic performance and power quality enhancement of emerging grid-forming wind power plants. Various topologies of wind energy conversion systems (WECSs) are examined and compared, and their control strategies are investigated. A comprehensive review on power quality and dynamic response issues caused by large-scale wind power integration is presented. Moreover, the evolving grid code requirements for grid-connected WPPs in most leading countries including Denmark, U.K., Australia, Germany, and the USA are analyzed and compared. Furthermore, the improvement approaches proposed in the literature are investigated and classified on different basis and their pros and cons are discussed. A brief discussion on the solutions and future directions is presented. Finally, some conclusive considerations about the overall study are provided.
Mooring systems for floating wave energy converters often rely on floaters to allow for minimum restraints of the body motion in heavy. However, the inclusion of floaters also introduce possible slack-taut scenarios induced by the dynamic response of the floater in relation to the fair-lead point of the mooring. This can increase the occurrence of snap loads. The present study outlines the work to include floaters and sinks into a high-order discontinuous Galerkin model for mooring cable dynamics. Numerical simulations of a mooring leg adapted from the Waves4Power full-scale device are performed, and the results from varying the floater geometry are analyzed.
For this case the floater influence on the occurrence of snap loads was clearly evident. There is a strong correlation between floater pitch response and cable slack in the upper mooring cable. For a floater with constant buoyancy, increasing the floater height and thereby increasing the pitch inertia of the floater is shown to decrease the range of frequencies where cable slack occurs. It is illustrated that for some cases, changing floater geometry can avoid slack altogether. A careful design of the floater geometry can thus make a large difference for the dynamic load factor of the mooring system.