Increasing developments in the offshore energy sector have led to demand for robotics use in inspection, maintenance, and repair maintenance tasks, particularly for the service life extension of structures. These robots experience slippage due to varying surface conditions caused by environmental factors and marine growth, leading to inconsistent traction forces and potential mission failures in single-drive systems. This paper explores control strategies and mechanical configurations both in simulation and on the physical industrial robot to mitigate slippage in offshore robotic operations, improving reliability and reducing costs. This study examines mechanical and control modifications such as multi-wheel drive (MWD), PID velocity control, and a feedback-linearized slip control system with an individual wheel disturbance observer to detect surface variations. The results indicate that a 3 WD setup with slip control handles the widest range of conditions but suffers from high control effort due to chattering effects. The simulations show potential for slip control; practically, challenges arise from low sampling rates compared to traction changes. In real-world conditions, a PID-controlled MWD system, combined with increased normal force, achieves better traction and stability. The findings highlight the need for further investigation into the mechanical design and sensor feedback, with the refinement of slip control strategies and observer design for the offshore environment.