The International Maritime Organization employs technical and operational indicators to assess ship energy efficiency. Weather conditions significantly impact ship fuel consumption during voyages, necessitating the consideration of this influence in energy efficiency calculations. This study aims to design models for estimating the impact of weather components on fuel consumption and develop correction factors to cope with the weather effect on the fuel consumption of container ships for different sea states. Using model-based machine learning, the study analyzes noon reports and hindcasted weather data from two sister container ships. It quantifies weather-induced fuel consumption across various sea states, ranging from 2% to 20%, with an average of 7%–13% depending on the model used. Correction factors specific to each sea state are derived, and different approaches for their integration into energy efficiency indicators are proposed. This study advocates tailored weather correction factors for energy efficiency metrics tied to specific sea states, emphasizing the need for standardized weather impact assessments. Prior to any formal policy application, future work is needed to address the limitations of the present study and extend this approach to various ship types and sizes and different geographical regions.
Maritime transportation is an essential pillar of modern societies, serving as the backbone of global trade. The shipping industry relies heavily on fossil fuels, significantly impacting the environment and contributing to climate change. The International Maritime Organization (IMO) has introduced a strategy to reduce greenhouse gas emissions from international shipping and decarbonize the industry to combat this issue. This strategy aims to accomplish energy efficiency gains, transition to alternative fuels, and implement market-based measures.
Various energy efficiency indicators are in use to monitor the performance of ships, both from technical and operational perspectives. Building upon previous research that identified shortcomings in these indicators, this thesis investigates alternative methods of assessing the energy efficiency of ships. Emphasizing the importance of a benchmarking tool, the primary objective of this thesis is to contribute to the policy debate on reducing emissions in international shipping by developing a comprehensive carbon intensity indicator.
The thesis comprises four articles addressing various approaches to monitoring ship carbon emissions. The first article focuses on the influence of weather conditions on a ship’s energy efficiency, thereby contributing to the ongoing discussion on weather correction factors. Using model-based machine learning techniques, this article illustrates the diverse sea conditions encountered, their impact on energy efficiency, and the necessity of accounting for this diversity through multiple correction factors.
The second and third articles introduce and develop the concept of operational cycles for maritime transportation, drawing inspiration from the driving cycles employed in the automotive industry. The second article describes the process of generating operational cycles for the maritime sector as a novel concept. It validates this concept using real-world data obtained from a fleet of container ships. Building upon this foundation, the third article extends the concept by elaborating more comprehensive cycles that better represent real-world indicators.
The fourth article explores voluntary reporting frameworks in the shipping industry. It focuses on the Clean Cargo case and investigates the needs and interests of its members regarding this private initiative and related reporting framework. The discussion revolves around the role of these voluntary frameworks as complementary approaches to regulatory frameworks towards maritime decarbonization.
Based on the methodology developments and analysis through the thesis, the following key findings and recommendations are presented:
• The weather impact on ships’ fuel consumption prevents an accurate and real assessment of ships’ efficiency. Multiple weather correction factors for energy efficiency indicators introduce a novel approach.
• Inspired by the automotive industry, maritime operational cycles improve the assessment of technical and operational aspects of a ship’s energy efficiency. The cycles reduce the variability inherent to energy
efficiency indicators and are suitable as benchmarking tools.
• Although the IMO regulatory framework remains at the core of the maritime decarbonization strategy, regional regulatory frameworks and private initiatives have demonstrated their capacity to enhance industry
practices and facilitate regulatory developments.
This thesis contributes to enhancing carbon emissions monitoring in the maritime industry by introducing new methodologies and assessments. The resulting proposals are designed to enrich ongoing discussions within the IMO and complement the existing regulatory frameworks.
Increasing concerns related to fossil fuels have led to the introducing the concept of emission-free ships (EF-Ships) in marine industry. One of the well-known combinations of green energy resources in EF-Ships is the hybridization of fuel cells (FCs) with energy storage systems (ESSs) and cold-ironing (CI). Due to the high investment cost of FCs and ESSs, the aging factors of these resources should be considered in the energy management of EF-Ships. This article proposes a nonlinear model for optimal energy management of EF-Ships with hybrid FC/ESS/CI as energy resources considering the aging factors of the FCs and ESSs. Total operation costs and aging factors of FCs and ESSs are chosen as problem objectives. Moreover, a stochastic model predictive control method is adapted to the model to consider the uncertainties during the optimization horizon. The proposed model is applied to an actual case test system and the results are discussed.
All-electric ships, and especially the hybrid ones with diesel generators and batteries, have attracted the attention of maritime industry in the last years due to their less emission and higher efficiency. The variant emission policies in different sailing areas and the impact of physical and environmental phenomena on ships energy consumption are two interesting and serious concepts in the maritime issues. In this paper, an efficient energy management strategy is proposed for a hybrid vessel that can effectively consider the emission policies and apply the impacts of ship resistant, wind direction and sea state on the ships propulsion. In addition, the possibility and impact of charging and discharging the carried electrical vehicles’ batteries by the ship is investigated. All mentioned matters are mathematically formulated and a general model of the system is extracted. The resulted model and real data are utilized for the proposed energy management strategy. A genetic algorithm is used in MATLAB software to obtain the optimal solution for a specific trip of the ship. Simulation results confirm the effectiveness of the proposed energy management method in economical and reliable operation of the ship considering the different emission control policies and weather condition impacts.
The utilization of green energy resources for supplying energy to ships in the marine industry has received increasing attention during the last years, where different green resource combinations and control strategies have been used. This article considers a ferry ship supplied by fuel cells (FCs) and batteries as the main sources of ship's power. Based on the designers' and owners' preferences, different scenarios can be considered for managing the operation of the FCs and batteries in all-electric marine power systems. In this article, while considering different constraints of the system, six operating scenarios for the set of FCs and batteries are proposed. Impacts of each proposed scenario on the optimal daily scheduling of FCs and batteries and operation costs of the ship are calculated using a mixed-integer nonlinear programming model. Model predictive control (MPC) is also applied to consider the deviations from hourly forecast demand. Moreover, since the efficiency of FCs varies for different output powers, the impacts of applying a linear model for FCs' efficiency are compared with the proposed nonlinear model and its related deviations from the optimal operation of the ship are investigated. The proposed model is solved by GAMS software using actual system data and the simulation results are discussed. Finally, detailed real-time hardware-in-the-loop (HiL) simulation outcomes and comparative analysis are presented to confirm the adaptation capability of the proposed strategy.
Strict limits on the maximum sulphur content in fuel used by ships have recently been imposed in some Emission Control Areas (ECAs). In order to comply with these regulations many ship operators will switch to more expensive low-sulphur fuel when sailing inside ECAs. Since they are concerned about minimizing their costs, it is likely that speed and routing decisions will change because of this. In this paper, we develop an optimization model to be applied by ship operators for determining sailing paths and speeds that minimize operating costs for a ship along a given sequence of ports. We perform a computational study on a number of realistic shipping routes in order to evaluate possible impacts on sailing paths and speeds, and hence fuel consumption and costs, from the ECA regulations. Moreover, the aim is to examine the implications for the society with regards to environmental effects. Comparisons of cases show that a likely effect of the regulations is that ship operators will often choose to sail longer distances to avoid sailing time within ECAs. Another effect is that they will sail at lower speeds within and higher speeds outside the ECAs in order to use less of the more expensive fuel. On some shipping routes, this might give a considerable increase in the total amount of fuel consumed and the CO2 emissions.
This study presents a detailed quantification of how flow orientation affects mass transfer and frictional resistance in periodically confined channels, offering novel insights into the physical similarity relations governing these phenomena. We constitute that the Sherwood number and friction factor adhere to universal scaling laws of the form Sh = A1+B sin(2α) Re1 2 and f = A1+B sin(2α) Re−1 2 , where α depicts the orientation of the periodically confined channel. It is found that the flow orientation and the cross flow velocity independently affect both, the Sherwood number and the friction factor. A key contribution of this work is the explicit characterization of the flow orientation: a 45° rotation of the flow relative to the spacer structure increases the Sherwood number by nearly 25%, while the friction factor rises by approximately 20%. These findings highlight a fundamental trade-off between mass transfer enhancement and flow resistance, suggesting that any process optimization must carefully balance the gains in mixing efficiency against the increased energy dissipation. This study provides a robust framework for further investigations into how periodic geometrical constraints influence transport processes in complex flow systems.
The literature on liner shipping includes many models on containership speed optimization, fleet deployment, fleet size and mix, network design and other problem variants and combinations. Many of these models, and in fact most models at the tactical planning level, assume a fixed revenue for the ship operator and as a result they typically minimize costs. This treatment does not capture a fundamental characteristic of shipping market behavior, that ships tend to speed up in periods of high freight rates and slow down in depressed market conditions. This paper develops a simple model for a fixed route scenario which, among other things, incorporates the influence of freight rates, along with that of fuel prices and cargo inventory costs into the overall decision process. The objective to be maximized is the line’s average daily profit. Departing from convention, the model is also able to consider flexible service frequencies, to be selected from a broader set than the standard assumption of one call per week. It is shown that this may lead to better solutions and that the cost of forcing a fixed frequency can be significant. Such cost is attributed either to additional fuel cost if the fleet is forced to sail faster to accommodate a frequency that is higher than the optimal one, or to lost income if the opposite is the case. The impact of the line’s decisions on CO2 emissions is also examined and illustrative runs of the model are made on three existing services.
Different procedures for estimation of the extreme global wave hydroelastic responses in ships are discussed. Firstly, stochastic procedures for application in detailed numerical studies (CFD) are outlined. The use of the First Order Reliability Method (FORM) to generate critical wave episodes of short duration, less than 1 minute, with prescribed probability content is discussed for use in extreme response predictions including hydroelastic behaviour and slamming load events. The possibility of combining FORM results with Monte Carlo simulations is discussed for faster but still very accurate estimation of extreme responses. Secondly, stochastic procedures using measured time series of responses as input are considered. The Peak-over-Threshold procedure and the Weibull fitting are applied and discussed for the extreme value predictions including possible corrections for clustering effects.
Nowadays, sea traveling is increasing due to its practicality and low-cost. Ferry boats play a significant role in the marine tourism industry to transfer passengers and tourists. Nevertheless, traditional ferry ships consume massive amounts of fossil fuels to generate the required energy for their motors and demanded loads. Also, by consuming fossil fuels, ferries spatter the atmosphere with CO2 emissions and detrimental particles. In order to address these issues, ferry-building industries try to utilize renewable energy sources (RESs) and energy storage systems (ESSs), instead of fossil fuels, to provide the required power in the ferry boats. In general, full-electric ferry (FEF) boats are a new concept to reduce the cost of fossil fuels and air emissions. Hence, FEF can be regarded as a kind of dc stand-alone microgrid with constant power loads (CPLs). This article proposes a new structure of a FEF ship based on RESs and ESSs. In order to solve the negative impedance induced instabilities in dc power electronic based RESs, a new intelligent single input interval type-2 fuzzy logic controller based on sliding mode control is proposed for the dc-dc converters feeding CLPs. The main feature of the suggested technique is that it is mode-free and regulates the plant without requiring the knowledge of converter dynamics. Finally, we conduct a dSPACE-based real-time experiment to examine the effectiveness of the proposed energy management system for FEF vessels.